[lxc-users] reach the outside world
Guillaume VINCENT
gvincent at oslab.fr
Fri Mar 13 13:20:16 UTC 2015
Thank you for your answers
I'm running ubuntu 14.04 on a dedicated server, lxc 0.3 and lxd 0.3
> auto lo
> iface lo inet loopback
>
> # The primary network interface
> auto eth0
> iface eth0 inet dhcp
this configuration correspond to my default /etc/network/interfaces on a dedicated server, after a fresh install
@Serge Hallyn
my lxcbr0 bridge was created by lxc itself, the only thing I'm trying do to is to connect this bridge to my eth0
so here my new /etc/network/interfaces (thank you, my eth0 should be set to manual, sorry)
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet manual
# LXC bridge
auto lxcbr0
iface lxcbr0 inet dhcp
bridge_ports eth0
ifconfig -a
eth0 Link encap:Ethernet HWaddr e8:9a:8f:50:90:87
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1917 errors:0 dropped:7 overruns:0 frame:0
TX packets:724 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:167618 (167.6 KB) TX bytes:79313 (79.3 KB)
Interrupt:28 Memory:feae0000-feb00000
...
lxcbr0 Link encap:Ethernet HWaddr e8:9a:8f:50:90:87
inet addr:x.x.x.230 Bcast:195.154.5.255 Mask:255.255.255.0
inet6 addr: xxxx::xxxx:xxxx:xxxx:xxxx/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1898 errors:0 dropped:0 overruns:0 frame:0
TX packets:708 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:130809 (130.8 KB) TX bytes:73009 (73.0 KB)
lxc list
root at oslab:~# lxc list
+--------------+---------+-----------+------+
| NAME | STATE | IPV4 | IPV6 |
+--------------+---------+-----------+------+
| my_container | RUNNING | 127.0.0.1 | ::1 |
+--------------+---------+-----------+------+
I'm probably missing something
I'm playing with lxd
container are new for me
@Guido
"I would say that the container don't have an adequate IP. And maybe no default route to your gateway x.x.x.1, too. Should this be set by DHCP or by static configuration?"
static configuration
other info for now /var/lib/lxd/lxc/my_container/ does not contain any config file or folder
root at oslab:~# ls /var/lib/lxd/lxc/my_container/
log rootfs
is it normal ?
Thank you for your patience
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxcontainers.org/pipermail/lxc-users/attachments/20150313/72300071/attachment.html>
More information about the lxc-users
mailing list