[lxc-users] reach the outside world

[Guido Jäkel]

Dear Guillaume,

from the output 
> | my_container | RUNNING | 127.0.0.1 | ::1  |

I would say that the container don't have an adequate IP. And maybe no default route to your gateway x.x.x.1, too. Should this be set by DHCP or by static configuration?

Guido


On 12.03.2015 23:54, Guillaume VINCENT wrote:
> Hello list,
> 
> I'm learning how to use lxd and play with my container.
> 
> For know I can download images, launch some container.
> 
> But I can't get my container reaching the outside world.
> 
> My host /etc/network/interfaces :
> 
> auto lo
> iface lo inet loopback
> 
> # The primary network interface
> auto eth0
> iface eth0 inet dhcp
> 
> auto lxcbr0
> iface lxcbr0 inet static
>     address x.x.x.230
>     netmask 255.255.255.0
>     network x.x.x.0
>     broadcast x.x.x.255
>     gateway x.x.x.1
>     bridge_ports eth0
>     bridge_stp off
>     bridge_fd 0
> 
> brctl show
> 
> bridge name	bridge id		STP enabled	interfaces
> lxcbr0		8000.e89a8f509087	no		eth0
> 
> lxc list
> 
> +--------------+---------+-----------+------+
> |     NAME     |  STATE  |   IPV4    | IPV6 |
> +--------------+---------+-----------+------+
> | my_container | RUNNING | 127.0.0.1 | ::1  |
> +--------------+---------+-----------+------+
> 
> 
> lxc config show my_container
> 
> Profiles: default
> 
> lxc config profile edit default
> 
> name: default
> config: {}
> devices:
>   eth0:
>     nictype: bridged
>     parent: lxcbr0
>     type: nic
> 
> 
> lxc exec my_container -- ping 8.8.8.8
> 
> connect: Network is unreachable
> 
> 
> Any idea ? Any ressource I can read ?
> 
> I've read lxc bridge setup post on the mailing list without any success
> 
> Thank you