[Lxc-users] LXC no connectivity after first "boot" of the guest
Klemens Rauch
klemens.rauch at rolmail.net
Fri Aug 10 13:47:53 UTC 2012
On 10.08.2012 13:33, Fajar A. Nugraha wrote:
> On Fri, Aug 10, 2012 at 3:23 PM, Klemens Rauch
> <klemens.rauch at rolmail.net> wrote:
>> Hi,
>>
>> I'm a beginner with lxc and and have been making my way thru the
>> documentation and several mailing lists.
>>
>> Now I have problem which I can't resolve by myself.
>> First of all some general Information about my Infrastructure:
>> I'm running a Debian Squeeze Server with a (3.2.0-0.bpo.2-amd64) Kernel,
>> running lxc (0.8.0~rc1-8) from testing repositories.
>> cgroups mounted, bridge-utils installed and configured, debootstrap and
>> libvirt-bin too.
>>
>> I made 4 wheezy guests via:
>> lxc-create -n xxx -t debian
>
> IIRC debian only support using lxc-debconf, not lxc-debian, so I
> wouldn't be surprised if you found a problem which won't be fixed.
>
>> Same behaviour with the other 3 guests. First boot everything works like
>> a charm than after the first time no connectivity to the rest of the world.
>
> What does "brctl show" on the host looks like:
> - before you start any guest
> - when the first guest is started
> - after the first guest is down
> - when the second guest is started (or is it the same guest restarted?)
>
> Just in case there were some problems with bridging on the host side.
>
> IIRC debian only support using lxc-debconf, not lxc-debian, so I
> wouldn't be surprised if you found a problem which won't be fixed.
I tried to create one with
lxc-create -n xxx -t debconf
But it crashes with the following output:
Downloading minimal system...
cd: 381: can't cd to http://ftp.debian.org
Failed to download the rootfs, aborting.
Failed to download base system
failed to install system
failed to execute template 'debconf'
aborted
Is there somewhere a documentation to use lxc with debconf as template?
> What does "brctl show" on the host looks like:
> - before you start any guest
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
> - when the first guest is started
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
vethCRhIeB
> - after the first guest is down
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
> - when the second guest is started (or is it the same guest restarted?)
all guests are started
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
vethE70uMb
vethQp9dQg
vethpNks24
veths5j2kt
and with a freshly installed guest
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
vethmALo2v
after the restart of the fresly installed guest
bridge name bridge id STP enabled interfaces
br0 8000.5404a6b49e33 no eth0
vethLXYG0R
dmesg output:
[20497.182908] ADDRCONF(NETDEV_UP): vethLXYG0R: link is not ready
[20497.280198] ADDRCONF(NETDEV_CHANGE): vethLXYG0R: link becomes ready
[20497.281207] br0: port 2(vethLXYG0R) entering forwarding state
[20497.282181] br0: port 2(vethLXYG0R) entering forwarding state
[20507.597801] vethLXYG0R: no IPv6 routers present
[20507.725734] eth0: no IPv6 routers present
[20511.004005] martian source 176.9.xxx.xxx from 195.254.xx.xx, on dev eth0
[20511.004976] ll header: 00:50:56:00:1a:b7:78:fe:3d:46:ed:88:08:00
[20514.008501] martian source 176.9.xxx.xxx from 195.254.xxx.xxx, on dev
eth0
[20514.009490] ll header: 00:50:56:00:1a:b7:78:fe:3d:46:ed:88:08:00
Greets
Klemens
More information about the lxc-users
mailing list