[lxc-users] Running snapd within LXC/LXD on a Debian host?

Linus Lüssing ll at ybit.eu
Fri Sep 14 19:01:40 UTC 2018


Hi,

I found the following, excellent article online:

https://blog.ubuntu.com/2016/02/16/running-snaps-in-lxd-containers

And I'm currently trying to achieve the same on an LXD host running Debian Stretch and a Container running Ubuntu 18.04.

The error I'm now getting within the container is the following though:

-----
$ journalctl -xe
[...]
-- Subject: Unit snapd.service has begun start-up
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
-- 
-- Unit snapd.service has begun starting up.
Sep 14 17:42:09 rocketchat2 snapd[195]: AppArmor status: apparmor is enabled but some features are missing: dbus, network
Sep 14 17:42:09 rocketchat2 snapd[195]: error: cannot start snapd: cannot mount squashfs image using "fuse.squashfuse": mount: /tmp/selftest-mountpoint-412081678: wrong fs type, bad option, bad superblock on /tmp/selftest-squashfs-971713707, missing codepage or helper program, or other error.
Sep 14 17:42:09 rocketchat2 systemd[1]: snapd.service: Main process exited, code=exited, status=1/FAILURE
Sep 14 17:42:09 rocketchat2 systemd[1]: snapd.service: Failed with result 'exit-code'.
Sep 14 17:42:09 rocketchat2 systemd[1]: Failed to start Snappy daemon.
-- Subject: Unit snapd.service has failed
-- Defined-By: systemd
-- Support: http://www.ubuntu.com/support
-- 
-- Unit snapd.service has failed.
-----

And I'm also getting some "DENIED" messages from apparmor in dmesg. See attachment.

I tried both a 4.17 kernel provided by Debian Stretch-Backports and a 4.18 kernel from Debian Testing. The kernel cmdline looks like this for 4.18 for instance:

-----
$ uname -a
Linux yServer 4.18.0-1-amd64 #1 SMP Debian 4.18.6-1 (2018-09-06) x86_64 GNU/Linux
$ cat /proc/cmdline 
BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=f59f51b8-93ba-45e7-b0d7-c7013c52c11c ro quiet apparmor=1 security=apparmor
-----

The squashfuse package is installed successfully within the container:

-----
$ dpkg -l | grep squashfuse
ii  squashfuse                  0.1.100-0ubuntu2                  amd64        FUSE filesystem to mount squashfs archives
-----


Are the kernels provided by Debian supposed to work for snapd within LXD? Or are there some non-upstream patches added to the Ubuntu kernel which are necessary to make things work as described in the blog post?

Regards,
Linus
-------------- next part --------------
[    0.000000] Linux version 4.18.0-1-amd64 (debian-kernel at lists.debian.org) (gcc version 7.3.0 (Debian 7.3.0-29)) #1 SMP Debian 4.18.6-1 (2018-09-06)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=f59f51b8-93ba-45e7-b0d7-c7013c52c11c ro quiet apparmor=1 security=apparmor
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x20d/0x2d0 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbd3bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbd3c000-0x00000000bbd6bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bbd6c000-0x00000000bc02afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc02b000-0x00000000bc0e6fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bc0e7000-0x00000000be10ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000be110000-0x00000000be110fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be111000-0x00000000be316fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be317000-0x00000000be46cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be46d000-0x00000000bf02efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf02f000-0x00000000bf071fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf072000-0x00000000bf7f0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bf7f1000-0x00000000bf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88M-HD+ R2.0, BIOS P1.90 05/08/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x200000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000BF800000 mask FFFFFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000240000000 aka 9216M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xbf800000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [(____ptrval____)]
[    0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1e944b000, 0x1e944bfff] PGTABLE
[    0.000000] BRK [0x1e944c000, 0x1e944cfff] PGTABLE
[    0.000000] BRK [0x1e944d000, 0x1e944dfff] PGTABLE
[    0.000000] BRK [0x1e944e000, 0x1e944efff] PGTABLE
[    0.000000] BRK [0x1e944f000, 0x1e944ffff] PGTABLE
[    0.000000] BRK [0x1e9450000, 0x1e9450fff] PGTABLE
[    0.000000] BRK [0x1e9451000, 0x1e9451fff] PGTABLE
[    0.000000] BRK [0x1e9452000, 0x1e9452fff] PGTABLE
[    0.000000] BRK [0x1e9453000, 0x1e9453fff] PGTABLE
[    0.000000] BRK [0x1e9454000, 0x1e9454fff] PGTABLE
[    0.000000] BRK [0x1e9455000, 0x1e9455fff] PGTABLE
[    0.000000] BRK [0x1e9456000, 0x1e9456fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35089000-0x3683bfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BC0AF078 000074 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BC0B53E8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180531/tbfadt-624)
[    0.000000] ACPI: DSDT 0x00000000BC0AF188 00625B (v02 ALASKA A M I    00000000 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000BC0DD080 000040
[    0.000000] ACPI: APIC 0x00000000BC0B54F8 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BC0B5578 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BC0B55C0 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000BC0B5600 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: AAFT 0x00000000BC0B5638 00021E (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000BC0B5858 000A60 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC0B62B8 00033B (v02 AMD    BANTRY   00000002 MSFT 04000000)
[    0.000000] ACPI: CRAT 0x00000000BC0B65F8 000550 (v01 AMD    BANTRY   00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000BC0B6B48 001115 (v01 AMD    CPMCMN   00000001 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1ffffb000-0x1ffffffff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bbd3bfff]
[    0.000000]   node   0: [mem 0x00000000bbd6c000-0x00000000bc02afff]
[    0.000000]   node   0: [mem 0x00000000be110000-0x00000000be110fff]
[    0.000000]   node   0: [mem 0x00000000be317000-0x00000000be46cfff]
[    0.000000]   node   0: [mem 0x00000000bf02f000-0x00000000bf071fff]
[    0.000000]   node   0: [mem 0x00000000bf7f1000-0x00000000bf7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.000000] Reserved but unavailable: 16062 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001ffffffff]
[    0.000000] On node 0 totalpages: 1818946
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11975 pages used for memmap
[    0.000000]   DMA32 zone: 766372 pages, LIFO batch:31
[    0.000000]   Normal zone: 16384 pages used for memmap
[    0.000000]   Normal zone: 1048576 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbd3c000-0xbbd6bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc02b000-0xbc0e6fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbc0e7000-0xbe10ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe111000-0xbe316fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe46d000-0xbf02efff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf072000-0xbf7f0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] [mem 0xbf800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 44 pages/cpu @(____ptrval____) s142744 r8192 d29288 u524288
[    0.000000] pcpu-alloc: s142744 r8192 d29288 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1790502
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-1-amd64 root=UUID=f59f51b8-93ba-45e7-b0d7-c7013c52c11c ro quiet apparmor=1 security=apparmor
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7047120K/7275784K available (10252K kernel code, 1222K rwdata, 3252K rodata, 1552K init, 656K bss, 228664K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31237 entries in 123 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 1000, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3094.353 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9a70d90e1, max_idle_ns: 440795205418 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6188.70 BogoMIPS (lpj=12377412)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028231] mce: CPU supports 7 MCE banks
[    0.028237] LVT offset 1 assigned for vector 0xf9
[    0.028243] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.028244] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.028246] Spectre V2 : Mitigation: Full AMD retpoline
[    0.028247] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028248] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.032389] Freeing SMP alternatives memory: 24K
[    0.036000] smpboot: CPU0: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G (family: 0x15, model: 0x30, stepping: 0x1)
[    0.036000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.036000] ... version:                0
[    0.036000] ... bit width:              48
[    0.036000] ... generic registers:      6
[    0.036000] ... value mask:             0000ffffffffffff
[    0.036000] ... max period:             00007fffffffffff
[    0.036000] ... fixed-purpose events:   0
[    0.036000] ... event mask:             000000000000003f
[    0.036000] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1 #2 #3
[    0.038183] smp: Brought up 1 node, 4 CPUs
[    0.038183] smpboot: Max logical packages: 1
[    0.038183] smpboot: Total of 4 processors activated (24754.82 BogoMIPS)
[    0.040346] devtmpfs: initialized
[    0.040346] x86/mm: Memory block size: 128MB
[    0.040667] PM: Registering ACPI NVS region [mem 0xbc02b000-0xbc0e6fff] (770048 bytes)
[    0.040667] PM: Registering ACPI NVS region [mem 0xbe111000-0xbe316fff] (2121728 bytes)
[    0.040667] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040667] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040667] pinctrl core: initialized pinctrl subsystem
[    0.041027] NET: Registered protocol family 16
[    0.041103] audit: initializing netlink subsys (disabled)
[    0.041108] audit: type=2000 audit(1536946846.040:1): state=initialized audit_enabled=0 res=1
[    0.041108] cpuidle: using governor ladder
[    0.041108] cpuidle: using governor menu
[    0.041108] ACPI: bus type PCI registered
[    0.041108] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.041108] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.041108] PCI: not using MMCONFIG
[    0.041108] PCI: Using configuration type 1 for base access
[    0.041108] PCI: Using configuration type 1 for extended access
[    0.041108] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.041108] mtrr: probably your BIOS does not setup all CPUs.
[    0.041108] mtrr: corrected configuration.
[    0.041108] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.041108] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044066] ACPI: Added _OSI(Module Device)
[    0.044066] ACPI: Added _OSI(Processor Device)
[    0.044067] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044068] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044068] ACPI: Added _OSI(Linux-Dell-Video)
[    0.047071] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.049044] ACPI: Interpreter enabled
[    0.049063] ACPI: (supports S0 S3 S4 S5)
[    0.049064] ACPI: Using IOAPIC for interrupt routing
[    0.049084] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.049114] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.049128] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.049311] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.052830] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.052836] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.053011] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.053261] PCI host bridge to bus 0000:00
[    0.053263] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.053264] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.053265] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.053266] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.053268] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.053269] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.053270] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.053271] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.053279] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[    0.053372] pci 0000:00:01.0: [1002:1313] type 00 class 0x030000
[    0.053384] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.053390] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[    0.053394] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.053398] pci 0000:00:01.0: reg 0x24: [mem 0xff700000-0xff73ffff]
[    0.053402] pci 0000:00:01.0: reg 0x30: [mem 0xff740000-0xff75ffff pref]
[    0.053405] pci 0000:00:01.0: enabling Extended Tags
[    0.053430] pci 0000:00:01.0: supports D1 D2
[    0.053432] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.053502] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[    0.053513] pci 0000:00:01.1: reg 0x10: [mem 0xff764000-0xff767fff 64bit]
[    0.053530] pci 0000:00:01.1: enabling Extended Tags
[    0.053550] pci 0000:00:01.1: supports D1 D2
[    0.053609] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[    0.053683] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[    0.053752] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
[    0.053774] pci 0000:00:03.2: enabling Extended Tags
[    0.053800] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.053872] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[    0.053966] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.053990] pci 0000:00:10.0: reg 0x10: [mem 0xff76a000-0xff76bfff 64bit]
[    0.054080] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.054168] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[    0.054192] pci 0000:00:10.1: reg 0x10: [mem 0xff768000-0xff769fff 64bit]
[    0.054282] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.054367] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[    0.054383] pci 0000:00:11.0: reg 0x10: [io  0xf190-0xf197]
[    0.054390] pci 0000:00:11.0: reg 0x14: [io  0xf180-0xf183]
[    0.054397] pci 0000:00:11.0: reg 0x18: [io  0xf170-0xf177]
[    0.054404] pci 0000:00:11.0: reg 0x1c: [io  0xf160-0xf163]
[    0.054411] pci 0000:00:11.0: reg 0x20: [io  0xf150-0xf15f]
[    0.054419] pci 0000:00:11.0: reg 0x24: [mem 0xff771000-0xff7717ff]
[    0.054435] pci 0000:00:11.0: set SATA to AHCI mode
[    0.054507] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.054521] pci 0000:00:12.0: reg 0x10: [mem 0xff770000-0xff770fff]
[    0.054625] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.054642] pci 0000:00:12.2: reg 0x10: [mem 0xff76f000-0xff76f0ff]
[    0.054704] pci 0000:00:12.2: supports D1 D2
[    0.054705] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.054774] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.054788] pci 0000:00:13.0: reg 0x10: [mem 0xff76e000-0xff76efff]
[    0.054896] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.054912] pci 0000:00:13.2: reg 0x10: [mem 0xff76d000-0xff76d0ff]
[    0.054974] pci 0000:00:13.2: supports D1 D2
[    0.054975] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.055043] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.055145] pci 0000:00:14.1: [1022:780c] type 00 class 0x01018a
[    0.055159] pci 0000:00:14.1: reg 0x10: [io  0xf140-0xf147]
[    0.055166] pci 0000:00:14.1: reg 0x14: [io  0xf130-0xf133]
[    0.055173] pci 0000:00:14.1: reg 0x18: [io  0xf120-0xf127]
[    0.055180] pci 0000:00:14.1: reg 0x1c: [io  0xf110-0xf113]
[    0.055187] pci 0000:00:14.1: reg 0x20: [io  0xf100-0xf10f]
[    0.055203] pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.055204] pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.055205] pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.055206] pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.055269] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.055288] pci 0000:00:14.2: reg 0x10: [mem 0xff760000-0xff763fff 64bit]
[    0.055339] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.055401] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.055510] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.055599] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310
[    0.055613] pci 0000:00:14.5: reg 0x10: [mem 0xff76c000-0xff76cfff]
[    0.055715] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[    0.055775] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[    0.055832] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[    0.055889] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[    0.055952] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[    0.056014] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[    0.056116] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.056138] pci 0000:01:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.056159] pci 0000:01:00.0: reg 0x18: [mem 0xff600000-0xff600fff 64bit]
[    0.056172] pci 0000:01:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref]
[    0.056243] pci 0000:01:00.0: supports D1 D2
[    0.056244] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.056329] pci 0000:00:03.2: PCI bridge to [bus 01]
[    0.056333] pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
[    0.056335] pci 0000:00:03.2:   bridge window [mem 0xff600000-0xff6fffff]
[    0.056338] pci 0000:00:03.2:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.056347] pci_bus 0000:02: extended config space not accessible
[    0.056397] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.056403] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.056404] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.056406] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.056407] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.056408] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.056409] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.056410] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.056772] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 *11 14 15)
[    0.056824] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 *11 14 15)
[    0.056877] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15)
[    0.056930] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 *10 11 14 15)
[    0.056972] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 *10 11 14 15)
[    0.057005] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.057038] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.057071] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.057248] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.057248] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.057248] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.057248] vgaarb: loaded
[    0.057248] pps_core: LinuxPPS API ver. 1 registered
[    0.057248] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[    0.057248] PTP clock support registered
[    0.057248] EDAC MC: Ver: 3.0.0
[    0.057248] PCI: Using ACPI for IRQ routing
[    0.064376] PCI: pci_cache_line_size set to 64 bytes
[    0.064421] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.064423] e820: reserve RAM buffer [mem 0xbbd3c000-0xbbffffff]
[    0.064423] e820: reserve RAM buffer [mem 0xbc02b000-0xbfffffff]
[    0.064424] e820: reserve RAM buffer [mem 0xbe111000-0xbfffffff]
[    0.064425] e820: reserve RAM buffer [mem 0xbe46d000-0xbfffffff]
[    0.064426] e820: reserve RAM buffer [mem 0xbf072000-0xbfffffff]
[    0.064427] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[    0.064525] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.064525] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.066098] clocksource: Switched to clocksource tsc-early
[    0.074806] VFS: Disk quotas dquot_6.6.0
[    0.074824] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.074955] AppArmor: AppArmor Filesystem Enabled
[    0.074975] pnp: PnP ACPI init
[    0.075120] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.075125] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.075183] system 00:01: [mem 0x80000000-0xbfffffff] could not be reserved
[    0.075186] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075239] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075336] system 00:03: [io  0x0290-0x029f] has been reserved
[    0.075339] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075567] pnp 00:04: [dma 3]
[    0.075650] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.075686] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075706] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.075755] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.075758] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075922] pnp 00:08: [dma 0 disabled]
[    0.075957] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.076164] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.076165] system 00:09: [io  0x040b] has been reserved
[    0.076167] system 00:09: [io  0x04d6] has been reserved
[    0.076168] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.076169] system 00:09: [io  0x0c14] has been reserved
[    0.076170] system 00:09: [io  0x0c50-0x0c51] has been reserved
[    0.076171] system 00:09: [io  0x0c52] has been reserved
[    0.076172] system 00:09: [io  0x0c6c] has been reserved
[    0.076174] system 00:09: [io  0x0c6f] has been reserved
[    0.076175] system 00:09: [io  0x0cd0-0x0cd1] has been reserved
[    0.076176] system 00:09: [io  0x0cd2-0x0cd3] has been reserved
[    0.076177] system 00:09: [io  0x0cd4-0x0cd5] has been reserved
[    0.076178] system 00:09: [io  0x0cd6-0x0cd7] has been reserved
[    0.076179] system 00:09: [io  0x0cd8-0x0cdf] has been reserved
[    0.076181] system 00:09: [io  0x0800-0x089f] has been reserved
[    0.076182] system 00:09: [io  0x0b20-0x0b3f] has been reserved
[    0.076183] system 00:09: [io  0x0900-0x090f] has been reserved
[    0.076184] system 00:09: [io  0x0910-0x091f] has been reserved
[    0.076186] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.076188] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.076189] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.076190] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.076192] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.076193] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.076195] system 00:09: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.076196] system 00:09: [mem 0xff800000-0xffffffff] has been reserved
[    0.076199] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.076346] pnp: PnP ACPI: found 10 devices
[    0.082435] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.082452] pci 0000:00:03.2: PCI bridge to [bus 01]
[    0.082454] pci 0000:00:03.2:   bridge window [io  0xe000-0xefff]
[    0.082457] pci 0000:00:03.2:   bridge window [mem 0xff600000-0xff6fffff]
[    0.082459] pci 0000:00:03.2:   bridge window [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.082463] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.082473] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.082474] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.082475] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.082476] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.082478] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.082479] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.082480] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.082481] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.082482] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
[    0.082484] pci_bus 0000:01: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref]
[    0.082485] pci_bus 0000:02: resource 4 [io  0x0000-0x03af window]
[    0.082486] pci_bus 0000:02: resource 5 [io  0x03e0-0x0cf7 window]
[    0.082487] pci_bus 0000:02: resource 6 [io  0x03b0-0x03df window]
[    0.082488] pci_bus 0000:02: resource 7 [io  0x0d00-0xffff window]
[    0.082489] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.082491] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.082492] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.082543] NET: Registered protocol family 2
[    0.082683] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.082712] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.082862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.083093] TCP: Hash tables configured (established 65536 bind 65536)
[    0.083143] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.083178] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.083257] NET: Registered protocol family 1
[    0.083276] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.083280] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0
[    0.173496] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6b0 took 87762 usecs
[    0.193494] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6b0 took 19514 usecs
[    0.193496] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.281489] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6b0 took 85915 usecs
[    0.301487] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6b0 took 19513 usecs
[    0.301489] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.389479] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6b0 took 85902 usecs
[    0.389496] PCI: CLS 64 bytes, default 64
[    0.389548] Unpacking initramfs...
[    0.739334] Freeing initrd memory: 24268K
[    0.739338] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.739341] software IO TLB [mem 0xb7d3c000-0xbbd3c000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.739418] amd_uncore: AMD NB counters detected
[    0.739523] LVT offset 0 assigned for vector 0x400
[    0.739557] perf: AMD IBS detected (0x000001ff)
[    0.740144] Initialise system trusted keyrings
[    0.740212] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.741486] zbud: loaded
[    0.741687] pstore: using deflate compression
[    1.033987] Key type asymmetric registered
[    1.033987] Asymmetric key parser 'x509' registered
[    1.034025] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.034060] io scheduler noop registered
[    1.034060] io scheduler deadline registered
[    1.034096] io scheduler cfq registered (default)
[    1.034097] io scheduler mq-deadline registered
[    1.034464] pcieport 0000:00:03.2: Signaling PME with IRQ 25
[    1.034488] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.034827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.055270] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.055674] Linux agpgart interface v0.103
[    1.055896] AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[    1.055897] AMD IOMMUv2 functionality not available on this system
[    1.056164] i8042: PNP: No PS/2 controller found.
[    1.056219] mousedev: PS/2 mouse device common for all mice
[    1.056250] rtc_cmos 00:06: RTC can wake from S4
[    1.056359] rtc_cmos 00:06: registered as rtc0
[    1.056372] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.056410] ledtrig-cpu: registered to indicate activity on CPUs
[    1.056685] NET: Registered protocol family 10
[    1.059175] Segment Routing with IPv6
[    1.059196] mip6: Mobile IPv6
[    1.059198] NET: Registered protocol family 17
[    1.059203] mpls_gso: MPLS GSO support
[    1.059526] microcode: CPU0: patch_level=0x06003106
[    1.059530] microcode: CPU1: patch_level=0x06003106
[    1.059537] microcode: CPU2: patch_level=0x06003106
[    1.059543] microcode: CPU3: patch_level=0x06003106
[    1.059579] microcode: Microcode Update Driver: v2.2.
[    1.059590] sched_clock: Marking stable (1059574433, 0)->(1146550663, -86976230)
[    1.059775] registered taskstats version 1
[    1.059775] Loading compiled-in X.509 certificates
[    1.096715] Loaded X.509 cert 'secure-boot-test-key-lfaraone: 97c1b25cddf9873ca78a58f3d73bf727d2cf78ff'
[    1.096733] zswap: loaded using pool lzo/zbud
[    1.096809] AppArmor: AppArmor sha1 policy hashing enabled
[    1.097110] rtc_cmos 00:06: setting system clock to 2018-09-14 17:40:47 UTC (1536946847)
[    1.098957] Freeing unused kernel image memory: 1552K
[    1.132041] Write protecting the kernel read-only data: 16384k
[    1.132645] Freeing unused kernel image memory: 2028K
[    1.132889] Freeing unused kernel image memory: 844K
[    1.139227] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.150865] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.150940] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.150948] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.177172] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.177634] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    1.177636] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[    1.177720] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    1.179838] ACPI: bus type USB registered
[    1.179861] usbcore: registered new interface driver usbfs
[    1.179870] usbcore: registered new interface driver hub
[    1.180943] usbcore: registered new device driver usb
[    1.182132] SCSI subsystem initialized
[    1.182418] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.185302] ehci-pci: EHCI PCI platform driver
[    1.185495] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.186271] QUIRK: Enable AMD PLL fix
[    1.186292] libata version 3.00 loaded.
[    1.186295] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.186304] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    1.187519] ahci 0000:00:11.0: version 3.0
[    1.187570] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    1.187762] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    1.187764] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    1.187815] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.187817] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.187819] usb usb1: Product: xHCI Host Controller
[    1.187820] usb usb1: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd
[    1.187821] usb usb1: SerialNumber: 0000:00:10.0
[    1.187937] hub 1-0:1.0: USB hub found
[    1.187945] hub 1-0:1.0: 2 ports detected
[    1.188120] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.188124] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
[    1.188128] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.188142] ehci-pci 0000:00:12.2: debug port 1
[    1.188175] ehci-pci 0000:00:12.2: irq 17, io mem 0xff76f000
[    1.188199] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    1.188201] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    1.188204] xhci_hcd 0000:00:10.0: Host supports USB 3.0  SuperSpeed
[    1.188932] r8169 0000:01:00.0 eth0: RTL8168g/8111g, d0:50:99:81:c0:bf, XID 4c000800, IRQ 32
[    1.188933] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.189918] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.189941] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    1.189943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.189944] usb usb3: Product: xHCI Host Controller
[    1.189945] usb usb3: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd
[    1.189946] usb usb3: SerialNumber: 0000:00:10.0
[    1.190065] cryptd: max_cpu_qlen set to 1000
[    1.190075] hub 3-0:1.0: USB hub found
[    1.190086] hub 3-0:1.0: 2 ports detected
[    1.190579] scsi host1: pata_atiixp
[    1.190659] scsi host0: ahci
[    1.190729] scsi host2: pata_atiixp
[    1.190854] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf100 irq 14
[    1.190855] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf108 irq 15
[    1.191213] scsi host3: ahci
[    1.191353] ata3: SATA max UDMA/133 abar m2048 at 0xff771000 port 0xff771100 irq 19
[    1.191356] ata4: SATA max UDMA/133 abar m2048 at 0xff771000 port 0xff771180 irq 19
[    1.191389] AVX version of gcm_enc/dec engaged.
[    1.191390] AES CTR mode by8 optimization enabled
[    1.203523] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.204026] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.204094] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.204096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.204097] usb usb2: Product: EHCI Host Controller
[    1.204098] usb usb2: Manufacturer: Linux 4.18.0-1-amd64 ehci_hcd
[    1.204100] usb usb2: SerialNumber: 0000:00:12.2
[    1.204230] hub 2-0:1.0: USB hub found
[    1.204237] hub 2-0:1.0: 5 ports detected
[    1.204412] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.204422] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[    1.204592] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    1.204878] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.204880] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.204881] usb usb4: Product: xHCI Host Controller
[    1.204882] usb usb4: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd
[    1.204883] usb usb4: SerialNumber: 0000:00:10.1
[    1.205008] hub 4-0:1.0: USB hub found
[    1.205024] hub 4-0:1.0: 2 ports detected
[    1.205180] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.205186] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 5
[    1.205188] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    1.205189] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.205191] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[    1.205194] xhci_hcd 0000:00:10.1: Host supports USB 3.0  SuperSpeed
[    1.205198] ehci-pci 0000:00:13.2: debug port 1
[    1.205232] ehci-pci 0000:00:13.2: irq 17, io mem 0xff76d000
[    1.208036] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.208063] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    1.208065] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.208066] usb usb6: Product: xHCI Host Controller
[    1.208067] usb usb6: Manufacturer: Linux 4.18.0-1-amd64 xhci-hcd
[    1.208068] usb usb6: SerialNumber: 0000:00:10.1
[    1.208198] hub 6-0:1.0: USB hub found
[    1.208206] hub 6-0:1.0: 2 ports detected
[    1.220045] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.220181] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    1.220184] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.220185] usb usb5: Product: EHCI Host Controller
[    1.220186] usb usb5: Manufacturer: Linux 4.18.0-1-amd64 ehci_hcd
[    1.220187] usb usb5: SerialNumber: 0000:00:13.2
[    1.220344] hub 5-0:1.0: USB hub found
[    1.220355] hub 5-0:1.0: 5 ports detected
[    1.220922] ohci-pci: OHCI PCI platform driver
[    1.221070] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.221075] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[    1.221110] ohci-pci 0000:00:12.0: irq 18, io mem 0xff770000
[    1.284082] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.284084] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.284085] usb usb7: Product: OHCI PCI host controller
[    1.284086] usb usb7: Manufacturer: Linux 4.18.0-1-amd64 ohci_hcd
[    1.284087] usb usb7: SerialNumber: 0000:00:12.0
[    1.284239] hub 7-0:1.0: USB hub found
[    1.284247] hub 7-0:1.0: 5 ports detected
[    1.284529] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.284533] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[    1.284555] ohci-pci 0000:00:13.0: irq 18, io mem 0xff76e000
[    1.348073] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.348075] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.348076] usb usb8: Product: OHCI PCI host controller
[    1.348077] usb usb8: Manufacturer: Linux 4.18.0-1-amd64 ohci_hcd
[    1.348078] usb usb8: SerialNumber: 0000:00:13.0
[    1.348224] hub 8-0:1.0: USB hub found
[    1.348235] hub 8-0:1.0: 5 ports detected
[    1.348508] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.348514] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 9
[    1.348535] ohci-pci 0000:00:14.5: irq 18, io mem 0xff76c000
[    1.372322] ata2.00: ATA-10: ST10000NM0086-2AA101, SN03, max UDMA/133
[    1.372325] ata2.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.372329] ata2.01: ATAPI: HL-DT-ST DVDRAM GH24NSC0, LK00, max UDMA/133
[    1.372332] ata2.00: limited to UDMA/33 due to 40-wire cable
[    1.372333] ata2.01: limited to UDMA/33 due to 40-wire cable
[    1.388324] ata1.00: ATA-10: ST10000NM0086-2AA101, SN03, max UDMA/133
[    1.388326] ata1.00: 19532873728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.388331] ata1.01: ATA-10: ST10000NM0086-2AA101, SN03, max UDMA/133
[    1.388331] ata1.01: 19532873728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.388334] ata1.00: limited to UDMA/33 due to 40-wire cable
[    1.388335] ata1.01: limited to UDMA/33 due to 40-wire cable
[    1.397841] scsi 1:0:0:0: Direct-Access     ATA      ST10000NM0086-2A SN03 PQ: 0 ANSI: 5
[    1.398132] scsi 1:0:1:0: Direct-Access     ATA      ST10000NM0086-2A SN03 PQ: 0 ANSI: 5
[    1.398385] scsi 2:0:0:0: Direct-Access     ATA      ST10000NM0086-2A SN03 PQ: 0 ANSI: 5
[    1.399230] scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GH24NSC0  LK00 PQ: 0 ANSI: 5
[    1.412069] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    1.412101] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.412102] usb usb9: Product: OHCI PCI host controller
[    1.412103] usb usb9: Manufacturer: Linux 4.18.0-1-amd64 ohci_hcd
[    1.412104] usb usb9: SerialNumber: 0000:00:14.5
[    1.412325] hub 9-0:1.0: USB hub found
[    1.412337] hub 9-0:1.0: 2 ports detected
[    1.668041] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.668059] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.704809] ata4.00: ATA-10: ST500LM030-2E717D, SDM1, max UDMA/133
[    1.704812] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.704821] ata3.00: ATA-10: ST500LM030-2E717D, SDM1, max UDMA/133
[    1.704823] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.724034] tsc: Refined TSC clocksource calibration: 3094.373 MHz
[    1.724044] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9a83ca60d, max_idle_ns: 440795230106 ns
[    1.724064] clocksource: Switched to clocksource tsc
[    1.753877] ata3.00: configured for UDMA/133
[    1.753893] ata4.00: configured for UDMA/133
[    1.754088] scsi 0:0:0:0: Direct-Access     ATA      ST500LM030-2E717 SDM1 PQ: 0 ANSI: 5
[    1.754435] scsi 3:0:0:0: Direct-Access     ATA      ST500LM030-2E717 SDM1 PQ: 0 ANSI: 5
[    1.759354] sd 1:0:0:0: [sda] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    1.759356] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.759362] sd 1:0:0:0: [sda] Write Protect is off
[    1.759364] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.759371] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.759491] sd 1:0:1:0: [sdb] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    1.759493] sd 1:0:1:0: [sdb] 4096-byte physical blocks
[    1.759499] sd 1:0:1:0: [sdb] Write Protect is off
[    1.759501] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.759508] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.759580] sd 2:0:0:0: [sdc] 19532873728 512-byte logical blocks: (10.0 TB/9.10 TiB)
[    1.759582] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[    1.759588] sd 2:0:0:0: [sdc] Write Protect is off
[    1.759589] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.759596] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.759674] sd 0:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.759675] sd 0:0:0:0: [sdd] 4096-byte physical blocks
[    1.759682] sd 0:0:0:0: [sdd] Write Protect is off
[    1.759683] sd 0:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    1.759693] sd 3:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.759695] sd 0:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.759696] sd 3:0:0:0: [sde] 4096-byte physical blocks
[    1.759701] sd 3:0:0:0: [sde] Write Protect is off
[    1.759703] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
[    1.759713] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.768041] usb 7-1: new low-speed USB device number 2 using ohci-pci
[    1.782269]  sde: sde1 sde2 < sde5 >
[    1.782615] sd 3:0:0:0: [sde] Attached SCSI disk
[    1.783638]  sdd: sdd1 sdd2 < sdd5 >
[    1.784101] sd 0:0:0:0: [sdd] Attached SCSI disk
[    1.823112] sr 2:0:1:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.823114] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.823410] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    1.880337]  sda: sda1
[    1.880700]  sdb: sdb1
[    1.880815] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.881009] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.965074] usb 7-1: New USB device found, idVendor=0000, idProduct=0538, bcdDevice= 1.00
[    1.965077] usb 7-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.965078] usb 7-1: Product:  USB OPTICAL MOUSE
[    1.968551] random: fast init done
[    1.968695]  sdc: sdc1
[    1.969693] hidraw: raw HID events driver (C) Jiri Kosina
[    1.974266] usbcore: registered new interface driver usbhid
[    1.974268] usbhid: USB HID core driver
[    1.975214] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/0003:0000:0538.0001/input/input0
[    1.975296] hid-generic 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0
[    2.004621] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.184013] raid6: sse2x1   gen()  7583 MB/s
[    2.237585] md/raid1:md0: active with 2 out of 2 mirrors
[    2.252006] raid6: sse2x1   xor()  4855 MB/s
[    2.257534] md/raid1:md1: active with 2 out of 2 mirrors
[    2.300033] usb 2-3: new high-speed USB device number 3 using ehci-pci
[    2.320009] raid6: sse2x2   gen()  8144 MB/s
[    2.388007] raid6: sse2x2   xor()  7257 MB/s
[    2.456005] raid6: sse2x4   gen() 11828 MB/s
[    2.463923] usb 2-3: New USB device found, idVendor=058f, idProduct=6387, bcdDevice= 1.ff
[    2.463926] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.463927] usb 2-3: Product: Intenso Alu Line
[    2.463928] usb 2-3: Manufacturer: 6989
[    2.463929] usb 2-3: SerialNumber: 3C2D77B4
[    2.524007] raid6: sse2x4   xor()  5623 MB/s
[    2.524009] raid6: using algorithm sse2x4 gen() 11828 MB/s
[    2.524009] raid6: .... xor() 5623 MB/s, rmw enabled
[    2.524010] raid6: using ssse3x2 recovery algorithm
[    2.524286] xor: automatically using best checksumming function   avx       
[    2.524471] async_tx: api initialized (async)
[    2.527092] md/raid:md2: device sdc1 operational as raid disk 2
[    2.527094] md/raid:md2: device sda1 operational as raid disk 0
[    2.527095] md/raid:md2: device sdb1 operational as raid disk 1
[    2.527399] md/raid:md2: raid level 5 active with 3 out of 3 devices, algorithm 2
[    2.581601] md1: detected capacity change from 0 to 449972273152
[    2.581709] md2: detected capacity change from 0 to 20001391116288
[    2.582380] md0: detected capacity change from 0 to 49864734208
[    2.632198]  md0: p1 p2 < p5 >
[    2.718253] device-mapper: uevent: version 1.0.3
[    2.718331] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel at redhat.com
[    2.828038] usb 7-4: new low-speed USB device number 3 using ohci-pci
[    3.037092] usb 7-4: New USB device found, idVendor=046a, idProduct=0180, bcdDevice= 1.03
[    3.037094] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.037096] usb 7-4: Product: wired keyboard
[    3.037097] usb 7-4: Manufacturer:  
[    3.050384] input:   wired keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/0003:046A:0180.0002/input/input1
[    3.108221] hid-generic 0003:046A:0180.0002: input,hidraw1: USB HID v1.11 Keyboard [  wired keyboard] on usb-0000:00:12.0-4/input0
[    3.116418] input:   wired keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/0003:046A:0180.0003/input/input2
[    3.176087] input:   wired keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/0003:046A:0180.0003/input/input3
[    3.176179] hid-generic 0003:046A:0180.0003: input,hidraw2: USB HID v1.11 Device [  wired keyboard] on usb-0000:00:12.0-4/input1
[    3.513944] usb-storage 2-3:1.0: USB Mass Storage device detected
[    3.514096] scsi host4: usb-storage 2-3:1.0
[    3.514226] usbcore: registered new interface driver usb-storage
[    3.514870] usbcore: registered new interface driver uas
[    4.541798] scsi 4:0:0:0: Direct-Access     Intenso  Alu Line         8.07 PQ: 0 ANSI: 4
[    4.574138] sd 4:0:0:0: [sdf] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[    4.575125] sd 4:0:0:0: [sdf] Write Protect is off
[    4.575126] sd 4:0:0:0: [sdf] Mode Sense: 23 00 00 00
[    4.576130] sd 4:0:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.581280]  sdf: sdf1 sdf2
[    4.584629] sd 4:0:0:0: [sdf] Attached SCSI removable disk
[   25.352080]  md0: p1 p2 < p5 >
[   33.920107] random: crng init done
[   33.920110] random: 7 urandom warning(s) missed due to ratelimiting
[   36.053712] EXT4-fs (md0p1): mounted filesystem with ordered data mode. Opts: (null)
[   37.121365] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   37.140172] systemd[1]: Detected architecture x86-64.
[   37.150048] systemd[1]: Set hostname to <yServer>.
[   37.687471] systemd[1]: Listening on Journal Socket.
[   37.687533] systemd[1]: Listening on Syslog Socket.
[   37.687553] systemd[1]: Listening on fsck to fsckd communication Socket.
[   37.687562] systemd[1]: Reached target User and Group Name Lookups.
[   37.687585] systemd[1]: Listening on LVM2 poll daemon socket.
[   37.687610] systemd[1]: Listening on Journal Socket (/dev/log).
[   37.687680] systemd[1]: Listening on Journal Audit Socket.
[   37.894076] lp: driver loaded but no devices found
[   37.918533] ppdev: user-space parallel port driver
[   37.969630] parport_pc 00:04: reported by Plug and Play ACPI
[   37.969685] parport0: PC-style at 0x378, irq 5 [PCSPP,EPP]
[   38.049907] EXT4-fs (md0p1): re-mounted. Opts: errors=remount-ro
[   38.064133] lp0: using parport0 (interrupt-driven).
[   38.110862] systemd-journald[584]: Received request to flush runtime journal from PID 1
[   39.001349] acpi_cpufreq: overriding BIOS provided _PSD data
[   39.013092] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   39.013249] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4
[   39.014666] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   39.014678] ACPI: Power Button [PWRB]
[   39.014723] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   39.014739] ACPI: Power Button [PWRF]
[   39.081266] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   39.081362] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   39.081489] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[   39.153264] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   39.153302] sd 1:0:1:0: Attached scsi generic sg1 type 0
[   39.153338] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   39.153383] sr 2:0:1:0: Attached scsi generic sg3 type 5
[   39.153419] sd 0:0:0:0: Attached scsi generic sg4 type 0
[   39.153454] sd 3:0:0:0: Attached scsi generic sg5 type 0
[   39.153490] sd 4:0:0:0: Attached scsi generic sg6 type 0
[   39.232052] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   39.478031] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   39.495343] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8
[   39.505889] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   39.505892] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   39.505894] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   39.505895] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   39.505896] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   39.505899] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   39.505900] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   39.505901] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   39.527252] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[   39.527316] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[   39.527371] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[   39.527446] snd_hda_intel 0000:00:14.2: device 1849:7662 is on the power_save blacklist, forcing power_save to 0
[   39.532401] [drm] radeon kernel modesetting enabled.
[   39.553092] [drm] initializing kernel modesetting (KAVERI 0x1002:0x1313 0x1849:0x1313 0x00).
[   39.553124] [drm] doorbell mmio base: 0xD0000000
[   39.553125] [drm] doorbell mmio size: 8388608
[   39.553199] ATOM BIOS: 113
[   39.553252] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   39.553255] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[   39.553260] [drm] Detected VRAM RAM=1024M, BAR=256M
[   39.553261] [drm] RAM width 128bits DDR
[   39.553341] [TTM] Zone  kernel: Available graphics memory: 3537918 kiB
[   39.553343] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   39.553344] [TTM] Initializing pool allocator
[   39.553349] [TTM] Initializing DMA pool allocator
[   39.553372] [drm] radeon: 1024M of VRAM memory ready
[   39.553373] [drm] radeon: 2048M of GTT memory ready.
[   39.553393] [drm] Loading kaveri Microcode
[   39.594762] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_pfp.bin
[   39.596294] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_me.bin
[   39.596601] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_ce.bin
[   39.597428] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_mec.bin
[   39.598327] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_mec2.bin
[   39.598534] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_rlc.bin
[   39.598686] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kaveri_sdma.bin
[   39.598692] [drm] Internal thermal controller without fan control
[   39.599809] [drm] radeon: dpm initialized
[   39.604978] kvm: Nested Virtualization enabled
[   39.604981] kvm: Nested Paging enabled
[   39.616227] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/bonaire_uvd.bin
[   39.616235] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[   39.640161] MCE: In-kernel MCE decoding enabled.
[   39.642244] EDAC amd64: Node 0: DRAM ECC disabled.
[   39.642246] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   39.647213] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_vce.bin
[   39.649585] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[   39.649607] [drm] GART: num cpu pages 524288, num gpu pages 524288
[   39.689051] EDAC amd64: Node 0: DRAM ECC disabled.
[   39.689054] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   39.690510] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[   39.690677] radeon 0000:00:01.0: WB enabled
[   39.690698] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x00000000abfa8233
[   39.690701] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0x0000000052ba547b
[   39.690704] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0x000000009e389127
[   39.690706] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0000000023a01512
[   39.690708] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0x000000002fb1f8ec
[   39.691114] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0x00000000cccb84be
[   39.691277] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000040000c18 and cpu addr 0x00000000861434dd
[   39.691279] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000040000c1c and cpu addr 0x000000002c553932
[   39.691281] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   39.691282] [drm] Driver supports precise vblank timestamp query.
[   39.691331] radeon 0000:00:01.0: radeon: using MSI.
[   39.691358] [drm] radeon: irq initialized.
[   39.693315] [drm] ring test on 0 succeeded in 2 usecs
[   39.693382] [drm] ring test on 1 succeeded in 2 usecs
[   39.693394] [drm] ring test on 2 succeeded in 2 usecs
[   39.693521] [drm] ring test on 3 succeeded in 3 usecs
[   39.693527] [drm] ring test on 4 succeeded in 3 usecs
[   39.739238] [drm] ring test on 5 succeeded in 1 usecs
[   39.759147] [drm] UVD initialized successfully.
[   39.764832] EDAC amd64: Node 0: DRAM ECC disabled.
[   39.764835] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   39.868424] [drm] ring test on 6 succeeded in 15 usecs
[   39.868435] [drm] ring test on 7 succeeded in 4 usecs
[   39.868435] [drm] VCE initialized successfully.
[   39.869429] [drm] ib test on ring 0 succeeded in 0 usecs
[   39.917129] EDAC amd64: Node 0: DRAM ECC disabled.
[   39.917133] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   40.199540] loop: module loaded
[   40.293884] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   40.380100] [drm] ib test on ring 1 succeeded in 0 usecs
[   40.892767] [drm] ib test on ring 2 succeeded in 0 usecs
[   40.892865] [drm] ib test on ring 3 succeeded in 0 usecs
[   40.892953] [drm] ib test on ring 4 succeeded in 0 usecs
[   41.272840] audit: type=1400 audit(1536946887.670:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1070 comm="apparmor_parser"
[   41.273096] audit: type=1400 audit(1536946887.670:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1070 comm="apparmor_parser"
[   41.337992] audit: type=1400 audit(1536946887.734:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1071 comm="apparmor_parser"
[   41.404047] [drm] ib test on ring 5 succeeded
[   41.424544] [drm] ib test on ring 6 succeeded
[   41.425065] [drm] ib test on ring 7 succeeded
[   41.428680] [drm] Radeon Display Connectors
[   41.428681] [drm] Connector 0:
[   41.428682] [drm]   DVI-D-1
[   41.428683] [drm]   HPD3
[   41.428685] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[   41.428685] [drm]   Encoders:
[   41.428686] [drm]     DFP2: INTERNAL_UNIPHY2
[   41.428687] [drm] Connector 1:
[   41.428687] [drm]   VGA-1
[   41.428688] [drm]   HPD1
[   41.428689] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[   41.428690] [drm]   Encoders:
[   41.428690] [drm]     CRT1: INTERNAL_UNIPHY
[   41.428691] [drm]     CRT1: NUTMEG
[   41.428691] [drm] Connector 2:
[   41.428692] [drm]   HDMI-A-1
[   41.428692] [drm]   HPD2
[   41.428694] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[   41.428694] [drm]   Encoders:
[   41.428695] [drm]     DFP1: INTERNAL_UNIPHY3
[   41.682296] [drm] fb mappable at 0xC0722000
[   41.682298] [drm] vram apper at 0xC0000000
[   41.682299] [drm] size 5787648
[   41.682299] [drm] fb depth is 24
[   41.682300] [drm]    pitch is 6400
[   41.682396] fbcon: radeondrmfb (fb0) is primary device
[   41.806984] audit: type=1400 audit(1536946888.202:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1073 comm="apparmor_parser"
[   41.808076] audit: type=1400 audit(1536946888.202:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1073 comm="apparmor_parser"
[   41.808080] audit: type=1400 audit(1536946888.202:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=1073 comm="apparmor_parser"
[   41.856035] Console: switching to colour frame buffer device 200x56
[   41.859214] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[   41.884823] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[   42.034352] [drm] amdgpu kernel modesetting enabled.
[   43.346190] device-mapper: thin: Data device (dm-2) discard unsupported: Disabling discard passdown.
[   44.906470] audit: type=1400 audit(1536946891.302:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1069 comm="apparmor_parser"
[   44.907011] audit: type=1400 audit(1536946891.302:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=1069 comm="apparmor_parser"
[   44.908237] audit: type=1400 audit(1536946891.306:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1069 comm="apparmor_parser"
[   44.908490] audit: type=1400 audit(1536946891.306:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=1069 comm="apparmor_parser"
[   48.218778] device-mapper: thin: Data device (dm-3) discard unsupported: Disabling discard passdown.
[   48.529748] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   48.534798] br0: port 1(enp1s0) entered blocking state
[   48.534800] br0: port 1(enp1s0) entered disabled state
[   48.534884] device enp1s0 entered promiscuous mode
[   48.536118] r8169 0000:01:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2)
[   48.536176] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware
[   48.536234] r8169 0000:01:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
[   48.536238] r8169 0000:01:00.0 enp1s0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-2)
[   48.590100] r8169 0000:01:00.0 enp1s0: link down
[   48.592347] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[   51.336276] r8169 0000:01:00.0 enp1s0: link up
[   51.336465] br0: port 1(enp1s0) entered blocking state
[   51.336468] br0: port 1(enp1s0) entered forwarding state
[   51.336553] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[   61.949382] new mount options do not match the existing superblock, will be ignored
[   61.991027] fuse init (API version 7.27)
[   68.358497] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: discard
[   69.004480] EXT4-fs (dm-10): mounted filesystem with ordered data mode. Opts: discard
[   69.889053] kauditd_printk_skb: 15 callbacks suppressed
[   69.889054] audit: type=1400 audit(1536946916.877:27): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-rocketchat2_</var/snap/lxd/common/lxd>" pid=2001 comm="apparmor_parser"
[   70.162684] br0: port 2(vethH8HLWB) entered blocking state
[   70.162686] br0: port 2(vethH8HLWB) entered disabled state
[   70.162775] device vethH8HLWB entered promiscuous mode
[   70.162928] IPv6: ADDRCONF(NETDEV_UP): vethH8HLWB: link is not ready
[   70.193309] eth0: renamed from vethINHA48
[   70.208375] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   70.208780] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   70.208811] IPv6: ADDRCONF(NETDEV_CHANGE): vethH8HLWB: link becomes ready
[   70.208842] br0: port 2(vethH8HLWB) entered blocking state
[   70.208845] br0: port 2(vethH8HLWB) entered forwarding state
[   72.984141] audit: type=1400 audit(1536946919.973:28): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-rocketchat2_</var/snap/lxd/common/lxd>" name="/sys/fs/cgroup/unified/" pid=2008 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
[   72.984183] audit: type=1400 audit(1536946919.973:29): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-rocketchat2_</var/snap/lxd/common/lxd>" name="/sys/fs/cgroup/unified/" pid=2008 comm="systemd" fstype="cgroup2" srcname="cgroup" flags="rw, nosuid, nodev, noexec"
[   73.118784] EXT4-fs (dm-15): mounted filesystem with ordered data mode. Opts: discard
[   73.426754] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[   75.010173] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[   75.468915] audit: type=1400 audit(1536946922.457:30): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-seafile_</var/snap/lxd/common/lxd>" pid=2129 comm="apparmor_parser"
[   76.020774] br0: port 3(vethSYEA36) entered blocking state
[   76.020776] br0: port 3(vethSYEA36) entered disabled state
[   76.020824] device vethSYEA36 entered promiscuous mode
[   76.020888] IPv6: ADDRCONF(NETDEV_UP): vethSYEA36: link is not ready
[   76.045402] eth0: renamed from vethN781A1
[   76.064447] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   76.064454] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   76.064485] IPv6: ADDRCONF(NETDEV_CHANGE): vethSYEA36: link becomes ready
[   76.064509] br0: port 3(vethSYEA36) entered blocking state
[   76.064511] br0: port 3(vethSYEA36) entered forwarding state
[   76.769431] audit: type=1400 audit(1536946923.757:31): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-rocketchat2_</var/snap/lxd/common/lxd>" name="/run/systemd/unit-root/run/lock/" pid=2213 comm="(networkd)" flags="ro, nosuid, nodev, noexec, remount, bind"
[   78.894353] audit: type=1400 audit(1536946925.881:32): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/sbin/dhclient" pid=2297 comm="apparmor_parser"
[   78.894657] audit: type=1400 audit(1536946925.881:33): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2297 comm="apparmor_parser"
[   78.894903] audit: type=1400 audit(1536946925.881:34): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=2297 comm="apparmor_parser"
[   78.895144] audit: type=1400 audit(1536946925.881:35): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2297 comm="apparmor_parser"
[   79.021064] audit: type=1400 audit(1536946926.009:36): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/usr/lib/snapd/snap-confine" pid=2299 comm="apparmor_parser"
[   79.021327] audit: type=1400 audit(1536946926.009:37): apparmor="STATUS" operation="profile_load" label="lxd-rocketchat2_</var/snap/lxd/common/lxd>//&:lxd-rocketchat2_<var-snap-lxd-common-lxd>:unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=2299 comm="apparmor_parser"
[   80.524643] audit: type=1400 audit(1536946927.513:38): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-rocketchat2_</var/snap/lxd/common/lxd>" name="/run/systemd/unit-root/run/lock/" pid=2332 comm="(resolved)" flags="ro, nosuid, nodev, noexec, remount, bind"
[   82.123435] audit: type=1400 audit(1536946929.109:39): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/home/" pid=2395 comm="(networkd)" flags="ro, nosuid, nodev, remount, bind"
[   83.406899] audit: type=1400 audit(1536946930.393:40): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=2505 comm="(resolved)" flags="ro, nosuid, noexec, remount, strictatime"
[   83.875840] audit: type=1400 audit(1536946930.861:41): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=2756 comm="(sh)" flags="ro, nosuid, noexec, remount, strictatime"
[  198.067968] br0: Multicast hash table chain limit reached: enp1s0
[  198.068062] br0: Multicast hash table on fire: enp1s0
[  198.068077] br0: Multicast hash table on fire: enp1s0
[  630.896733] br0: port 3(vethSYEA36) entered disabled state
[  631.033184] br0: port 3(vethSYEA36) entered disabled state
[  631.033373] device vethSYEA36 left promiscuous mode
[  631.033377] br0: port 3(vethSYEA36) entered disabled state
[  632.897739] audit: type=1400 audit(1536947479.887:42): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="lxd-seafile_</var/snap/lxd/common/lxd>" pid=3302 comm="apparmor_parser"
[  652.048405] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[  652.540640] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[  652.860312] audit: type=1400 audit(1536947499.847:43): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-seafile_</var/snap/lxd/common/lxd>" pid=3420 comm="apparmor_parser"
[  653.249780] br0: port 3(vethWGTEJF) entered blocking state
[  653.249784] br0: port 3(vethWGTEJF) entered disabled state
[  653.249842] device vethWGTEJF entered promiscuous mode
[  653.249928] IPv6: ADDRCONF(NETDEV_UP): vethWGTEJF: link is not ready
[  653.249930] br0: port 3(vethWGTEJF) entered blocking state
[  653.249931] br0: port 3(vethWGTEJF) entered forwarding state
[  653.251318] br0: port 3(vethWGTEJF) entered disabled state
[  653.291181] eth0: renamed from veth4NYGQK
[  653.305923] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  653.306225] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  653.306251] IPv6: ADDRCONF(NETDEV_CHANGE): vethWGTEJF: link becomes ready
[  653.306274] br0: port 3(vethWGTEJF) entered blocking state
[  653.306276] br0: port 3(vethWGTEJF) entered forwarding state
[  655.200916] audit: type=1400 audit(1536947502.187:44): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/home/" pid=3521 comm="(networkd)" flags="ro, nosuid, nodev, remount, bind"
[  656.069301] audit: type=1400 audit(1536947503.055:45): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=3586 comm="(resolved)" flags="ro, nosuid, noexec, remount, strictatime"
[  656.517332] audit: type=1400 audit(1536947503.503:46): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=3736 comm="(sh)" flags="ro, nosuid, noexec, remount, strictatime"
[  697.316900] br0: port 3(vethWGTEJF) entered disabled state
[  697.404157] br0: port 3(vethWGTEJF) entered disabled state
[  697.405939] device vethWGTEJF left promiscuous mode
[  697.405943] br0: port 3(vethWGTEJF) entered disabled state
[  698.725352] audit: type=1400 audit(1536947545.711:47): apparmor="STATUS" operation="profile_remove" profile="unconfined" name="lxd-seafile_</var/snap/lxd/common/lxd>" pid=4069 comm="apparmor_parser"
[  717.597770] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[  718.448998] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: discard
[  718.806073] audit: type=1400 audit(1536947565.795:48): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxd-seafile_</var/snap/lxd/common/lxd>" pid=4179 comm="apparmor_parser"
[  719.248721] br0: port 3(vethS1X2JY) entered blocking state
[  719.248725] br0: port 3(vethS1X2JY) entered disabled state
[  719.248860] device vethS1X2JY entered promiscuous mode
[  719.249092] IPv6: ADDRCONF(NETDEV_UP): vethS1X2JY: link is not ready
[  719.287127] eth0: renamed from vethARS7TP
[  719.310222] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  719.310635] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  719.310677] IPv6: ADDRCONF(NETDEV_CHANGE): vethS1X2JY: link becomes ready
[  719.310712] br0: port 3(vethS1X2JY) entered blocking state
[  719.310715] br0: port 3(vethS1X2JY) entered forwarding state
[  721.626161] audit: type=1400 audit(1536947568.615:49): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/home/" pid=4285 comm="(networkd)" flags="ro, nosuid, nodev, remount, bind"
[  722.677596] audit: type=1400 audit(1536947569.663:50): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=4349 comm="(resolved)" flags="ro, nosuid, noexec, remount, strictatime"
[  723.089557] audit: type=1400 audit(1536947570.075:51): apparmor="DENIED" operation="mount" info="failed flags match" error=-13 profile="lxd-seafile_</var/snap/lxd/common/lxd>" name="/dev/" pid=4379 comm="(sh)" flags="ro, nosuid, noexec, remount, strictatime"


More information about the lxc-users mailing list