[lxc-users] Recommended techniques for dynamically provisioning containers using lxd

[Zach Lanich]

Umberto, I’m not 100% sure of what SaltStack uses under the hood lib wise, but it’s written in Python an already does everything that Lib does. We’re talking more of how the creation of the LXD containers themselves, including setting Mounts, Static IP, etc. SaltStack & Chef handle everything else from there once the provisioned container is connected to the master. CloudInit would certainly be an option as the 2nd part of the equation if we weren’t already using a configuration management tool. 

Does that make sense, or am I’m misinterpreting your point?

Best Regards,

Zach Lanich
Owner/CTO
weCreate LLC
www.WeCreate.com
814.580.6636

> On Aug 23, 2016, at 1:26 PM, Umberto Nicoletti <umberto.nicoletti at gmail.com> wrote:
> 
> Why not use https://cloudinit.readthedocs.io/en/latest/ <https://cloudinit.readthedocs.io/en/latest/> ?
> 
> On Tuesday, August 23, 2016, Zach Lanich <zach at zachlanich.com <mailto:zach at zachlanich.com>> wrote:
> I’m not sure of the best way to pass LXD/Container specific parameters is yet (so anyone, please chime in if you have advice), but I’m using SaltStack at the moment and doing something similar. I’m currently running w/e necessary commands to provision the container itself, setting the container’s IP via a custom dnsmasq conf file, then using lxc exec to download the latest salt bootstrap and run it, then I just trigger a key-accept on the master for the container so the container acts just like any other minion and I can run State/Scripts, etc on it from there on.
> 
> Hopefully that helps in some way lol. Still awaiting best practice advice for passing container params for provision!
> 
> Best Regards,
> 
> Zach Lanich
> Business Owner, Entrepreneur, Creative
> Owner/CTO
> weCreate LLC
> www.WeCreate.com <http://www.wecreate.com/>
>> On Aug 23, 2016, at 1:05 PM, P. Lowe <plowe at zitovault.com <javascript:_e(%7B%7D,'cvml','plowe at zitovault.com');>> wrote:
>> 
>> Hi Zach,
>> 
>> No, I still haven't received an answer on this.
>> 
>> I'm still trying to determine if there is a best practice for passing provisioning parameters to an lxd container (hostname, block device mounts, secrets, monitoring server name for pub/sub, etc.)
>> 
>> I'm currently using a technique where I launch a new image, start it, and then do a:
>> 
>> "lxd file push ./provision.sh /container1/etc/rc.local"
>> 
>> Then I restart the container and it runs the provisioning in /etc/rc.local (pull and execute chef cookbook from git), and then reset rc.local to empty, so that future restarts won't re-run the provisioning.
>> 
>> Still trying to determine best way to pass provisioning parameters to the container...
>> 
>> -P. Lowe
>> 
>> 
>> Quoting Zach Lanich <zach at zachlanich.com <javascript:_e(%7B%7D,'cvml','zach at zachlanich.com');>>:
>> 
>>> P.Lowe, did you ever get an answer on this. I’m doing something very similar with SaltStack.
>>> 
>>> Best Regards,
>>> 
>>> Zach Lanich
>>> Business Owner, Entrepreneur, Creative
>>> Owner/CTO
>>> weCreate LLC
>>> www.WeCreate.com <http://www.wecreate.com/>
>>> 
>>>> On Aug 17, 2016, at 4:48 PM, P. Lowe <plowe at zitovault.com <javascript:_e(%7B%7D,'cvml','plowe at zitovault.com');>> wrote:
>>>> 
>>>> 
>>>> Hi,
>>>> 
>>>> I am investigating the use of lxd to dynamically spin up server instances.
>>>> 
>>>> I'm thinking about using a code-as-infrastructure approach using a chef-solo cookbook that is pulled out of git upon the container's initial boot and does all the provisioning upon initial boot.
>>>> 
>>>> Would people recommend creating a new container from a base image, modifying rc.local to pull the cookbook from git and launch it upon initial bootup, after which rc.local is reset to be empty and the server is restarted?
>>>> 
>>>> After rc.local is modified, the new container would be published to the local image store, so that whenever a new container is launched, it will boot up, run rc.local, pull the cookbook from git, run the cookbook and apply all the local provisioning operations, empty out rc.local, and then reboot the machine, after which it will boot with the customized provisioning parameters for normal operation.
>>>> 
>>>> What is the recommended way to send provisioning parameters (e.g. ip address, gateway, hostname, block device mounts, secrets (certs / keys)) to the container? Would people just drop a config file into the container using the lxc push command, or any other better techniques?
>>>> 
>>>> Thanks,
>>>> 
>>>> P.Lowe
>>>> 
>>>> 
>>>> _______________________________________________
>>>> lxc-users mailing list
>>>> lxc-users at lists.linuxcontainers.org <javascript:_e(%7B%7D,'cvml','lxc-users at lists.linuxcontainers.org');>
>>>> http://lists.linuxcontainers.org/listinfo/lxc-users <http://lists.linuxcontainers.org/listinfo/lxc-users>
>> 
>> 
>> 
>> 
> 
> _______________________________________________
> lxc-users mailing list
> lxc-users at lists.linuxcontainers.org
> http://lists.linuxcontainers.org/listinfo/lxc-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxcontainers.org/pipermail/lxc-users/attachments/20160823/ca56aa96/attachment-0001.html>