[lxc-users] lxd not providing port 8443

Kevin LaTona lists at studiosola.com
Wed Aug 12 05:25:47 UTC 2015


Hey Mark,

There was an issue like this back around 0.8 but it was fixed.

See if this link gives you any clues. https://github.com/lxc/lxd/issues/550

Or go back through LXD list from around May 2015 as it sounds like the Unix socket is not running.

-Kevin



On Aug 11, 2015, at 9:16 PM, Mark Constable <markc at renta.net> wrote:

> I have 2 *buntu 15.10 hosts and my local one has a few trusty, utopic and
> wily containers. I've just updated a local LAN remote NAS to wily (so both
> ends run the same version of lxd/lxc) and want to test copying and migration.
> 
> However, neither my local or remote test machines have anything running on
> port 8443. Is there some "trick" to start lxd plus access via port 8443?
> 
> 
> ~ p lxd
> root      2098  0.0  0.1 380028 19756 ?        Ssl  Aug11   0:02 /usr/bin/lxd --group lxd --logfile=/var/log/lxd/lxd.log
> root      2123  0.0  0.0 213924  6352 ?        Ss   Aug11   0:00 [lxc monitor] /var/lib/lxd/containers gc1
> root      5803  0.0  0.0 213924  4308 ?        Ss   Aug11   0:00 [lxc monitor] /var/lib/lxd/containers gc5
> 
> ~ lxc list
> +-------------------+---------+-------------+------+-----------+-----------+
> |       NAME        |  STATE  |    IPV4     | IPV6 | EPHEMERAL | SNAPSHOTS |
> +-------------------+---------+-------------+------+-----------+-----------+
> | gc4               | STOPPED |             |      | NO        | 0         |
> | gc5               | RUNNING | 192.168.0.5 |      | NO        | 0         |
> | gc6               | STOPPED |             |      | NO        | 0         |
> | gc1               | RUNNING | 192.168.0.3 |      | NO        | 0         |
> +-------------------+---------+-------------+------+-----------+-----------+
> 
> ~ sudo netstat -tanup | grep 8443
> [... nothing ...]
> 
> From the remote back to my local host...
> 
> ~ lxc remote add mbox https://mbox:8443 --debug
> DBUG[08-12|14:08:45] Error reading the server certificate for mbox:
>  open /home/markc/.config/lxc/servercerts/mbox.crt: no such file or directory
> 
> DBUG[08-12|14:08:45] fingering the daemon 
> error Get https://mbox:8443/1.0: Unable to connect to: mbox:8443
> 
> 
> There is no firewall between them (from remote LAN NAS back to my laptop).
> 
> ~ nmap mbox
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2015-08-12 14:11 AEST
> Nmap scan report for mbox (192.168.0.2)
> Host is up (0.00032s latency).
> Not shown: 997 closed ports
> PORT     STATE SERVICE
> 53/tcp   open  domain
> 111/tcp  open  rpcbind
> 2049/tcp open  nfs
> 
> Nmap done: 1 IP address (1 host up) scanned in 0.07 seconds
> 
> And fwiw this is the wily container running on my local host scanned
> from the remote LAN NAS (ie; no fundamental networking issues)...
> 
> ~ nmap gc1
> 
> Starting Nmap 6.47 ( http://nmap.org ) at 2015-08-12 14:12 AEST
> Nmap scan report for gc1 (192.168.0.3)
> Host is up (0.00032s latency).
> Not shown: 994 closed ports
> PORT    STATE SERVICE
> 22/tcp  open  ssh
> 25/tcp  open  smtp
> 80/tcp  open  http
> 443/tcp open  https
> 465/tcp open  smtps
> 993/tcp open  imaps
> 
> Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds
> 
> _______________________________________________
> lxc-users mailing list
> lxc-users at lists.linuxcontainers.org
> http://lists.linuxcontainers.org/listinfo/lxc-users



More information about the lxc-users mailing list