[Lxc-users] lxc template for RHEL?

[Dan Kegel]

On Fri, Aug 24, 2012 at 7:00 PM, Fajar A. Nugraha <list at fajar.net> wrote:
>> Aren't the default templates supposed to work with the default config file?
>
> It should. Which is why I thought you edit the config file. Try:
> - adding lxc.network.veth.pair=test-e0

No change.

> - run "ip link show" on the host, and for every interface that starts
> with a "veth", do "ip link del" on that interface. That is, assuming
> you don't currently have any containers or anything that uses veth
> running.

There are no veth's:

$ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP qlen 1000
    link/ether 00:25:22:2f:b9:40 brd ff:ff:ff:ff:ff:ff
4: lxcbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
state DOWN
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
52: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
state DOWN
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff

> - try the second link, which create the rootfs and config file by hand
> instead of using a script.

Well, foo.  I need to end up with a debugged script, and I was hoping
that since lxc-create -t centos had worked for someone recently
(and lxc-create -t fedora works for me now), success wouldn't be far off.

I guess I'll try to understand lxc-start more.
- Dan