[Lxc-users] Bug discussion: implementing high virtual device MAC addresses
Derek Simkowiak
derek at simkowiak.net
Mon Oct 24 23:08:54 UTC 2011
Francois-Xavier,
Thank you for your feedback.
I have seen the issue on two systems where STP is turned off. Here
is the /etc/network/interfaces entry for the particular bridge where
I've seen it the most; note the last line:
iface br0 inet dhcp
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off
(As you can see, on this server I was using DHCP for the bridge.
That is rare, but not unusual. In this case we centrally manage all
fixed IP addresses using an /etc/ethers file on the DHCP server.)
I submit that the symptom is not related to STP, but instead is
related to the ARP cache (and network topology) of the equipment you are
connecting through. With my Linux laptop hooked up through two GigE
switches (and no STP), I see the host's network freeze. I've seen it on
Ubuntu 10.04 and 11.04.
F> /If you are using a bridge in a controlled environment, you really
dont need STP anyway./
If using collocation or managed hardware from a data center
provider, you may not have a choice re: STP.
It is worth noting that the KVM/libvirt folks found the issue
serious enough to fix.
Thank You,
Derek Simkowiak
On 10/24/2011 11:41 AM, Francois-Xavier Bourlet wrote:
> Hi,
>
> Here we are using lxc intensively with bridges. Since we don't use
> STP, the downtime for each a mac@ change is unnoticeable. In fact,
> we discovered it when reading this mailinglist. After some test I can
> confirm that most of the time we are spawning/destroying a container,
> the bridge's mac@ change, but there is no loss of connectivity, since
> arp tables are instantly refreshed.
>
> So an easy workaround for the moment is to disable STP on the brige
> (brctl br0 stp off). If you are using a bridge in a
> controlled environment, you really dont need STP anyway.
>
> My 2cents,
>
> On Mon, Oct 24, 2011 at 11:09 AM, Derek Simkowiak <derek at simkowiak.net
> <mailto:derek at simkowiak.net>> wrote:
>
> Hello,
> Just following up re: this bug. I think it's a pretty serious
> issue.
>
> I am looking to work on this, but I am seeking some feedback and
> direction from one of the core LXC devs.
>
> - Do you agree with my analysis?
> - Has anyone else worked on this already?
> etc.
>
>
> Thanks,
> Derek
>
> On 10/18/2011 04:31 PM, Derek Simkowiak wrote:
> > There is a behavior in the Linux kernel which can cause a
> bridge
> > device to change MAC address, thus causing a network blackout of
> several
> > seconds (while everybody ARPs the new MAC address flushes the
> old one).
> > This happens when bridging an enslaved interface, like we do
> with LXC.
> >
> > The symptom is that the LXC host will black out for
> several seconds
> > when starting or stopping an LXC container. Your SSH terminal
> on the
> > host will freeze and become unresponsive. (It is a random symptom,
> > because the blackout only happens if the randomly-assigned MAC
> address
> > of the virtual device is lower than that of the physical eth0
> device).
> >
> > This behavior was first observed by the libvirt folks when
> creating
> > virtual machines. You can read more details about it (and how they
> > fixed it) here:
> >
> > https://www.redhat.com/archives/libvir-list/2010-July/msg00450.html
> > https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/584048
> >
> > I have observed the symptom under LXC, and the workaround
> for it
> > has been independently confirmed for LXC in this bug report (ID:
> 3411497):
> >
> >
> http://sourceforge.net/tracker/index.php?func=detail&aid=3411497&group_id=163076&atid=826303
> <http://sourceforge.net/tracker/index.php?func=detail&aid=3411497&group_id=163076&atid=826303>
> >
> >
> > The workaround for the bug is to give the virtual device a
> high MAC
> > address, thus discouraging the bridge device from adapting its MAC
> > address as its own.
> >
> > I have mentioned this bug on the list before, however, I was
> > confused about which MAC address was causing the problem. This
> is NOT
> > the mac address specified in lxc.conf, like this:
> >
> > lxc.network.hwaddr = fe:16:3e:fd:5a:5b
> >
> > That MAC address has nothing to do with the bug; the
> host's bridge
> > device (br0) will never assume a configured LXC MAC address as
> its own.
> > Instead, the MAC address in question is the one of the virtual
> vethXXXX
> > device, as shown with "ifconfig" on the host:
> >
> > veth0IEDlk Link encap:Ethernet HWaddr 4e:34:7c:dc:92:e8
> > [...snip...]
> >
> > That HWaddr should be given a high prefix to avoid the network
> > blackouts, just like they've done for libvirt. That does not
> exist in
> > any config file anywhere; it must be fixed in the LXC source code.
> >
> > I looked in network.c for the LXC source code and I think
> the fix
> > should go in lxc_bridge_attach() near line 991. The fix would put a
> > manually-generated MAC address -- one with a high prefix -- into
> > ifr.ifr_hwaddr.sa_data and thus replace the random one assigned
> by the
> > kernel.
> >
> > However, I'm new to the LXC source and would like some
> input and
> > analysis from a more seasoned contributor. I would be happy to
> test and
> > maybe even contribute a patch, but I'd like some feedback first.
> >
> >
> > Thank You,
> > Derek Simkowiak
> >
> >
> >
> ------------------------------------------------------------------------------
> > All the data continuously generated in your IT infrastructure
> contains a
> > definitive record of customers, application performance, security
> > threats, fraudulent activity and more. Splunk takes this data
> and makes
> > sense of it. Business sense. IT sense. Common sense.
> > http://p.sf.net/sfu/splunk-d2d-oct
> > _______________________________________________
> > Lxc-users mailing list
> > Lxc-users at lists.sourceforge.net
> <mailto:Lxc-users at lists.sourceforge.net>
> > https://lists.sourceforge.net/lists/listinfo/lxc-users
>
>
> ------------------------------------------------------------------------------
> The demand for IT networking professionals continues to grow, and the
> demand for specialized networking skills is growing even more rapidly.
> Take a complimentary Learning at Cisco Self-Assessment and learn
> about Cisco certifications, training, and career opportunities.
> http://p.sf.net/sfu/cisco-dev2dev
> _______________________________________________
> Lxc-users mailing list
> Lxc-users at lists.sourceforge.net
> <mailto:Lxc-users at lists.sourceforge.net>
> https://lists.sourceforge.net/lists/listinfo/lxc-users
>
>
>
>
> --
> François-Xavier Bourlet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxcontainers.org/pipermail/lxc-users/attachments/20111024/fc1e86db/attachment.html>
More information about the lxc-users
mailing list