[Lxc-users] Broken pipe when ssh from host to container

Verdi March cincaipatron at gmx.net
Thu Dec 15 06:21:06 UTC 2011 

Hi,

I setup a container on Ubuntu 10.04, using kernel 3.0 (backported from
oneiric) and lxc 0.7.5.

If I ssh from the host to the container, my session will be terminated
in about 5 seconds with a error message "Write failed: broken pipe".
Ssh keep alive doesn't seem to be the issue, as I've enabled/set all
relevant options.

Interestingly, if I ssh from another machine rather from the host, I do
not encounter this issue.

Any insight on solving this problem is appreciated.

ps. I'm including the debug output of ssh -vvv for your reference.

===================== begin ssh log ========================
verdi.march at opencirrus-07308:~$ ssh -vvv root at 198.55.37.111
OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to 198.55.37.111 [198.55.37.111] port 22.
debug1: Connection established.
debug1: identity file /home/verdi.march/.ssh/identity type -1
debug1: identity file /home/verdi.march/.ssh/id_rsa type -1
debug1: identity file /home/verdi.march/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5
debug1: match: OpenSSH_5.1p1 Debian-5 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7
debug2: fd 3 setting O_NONBLOCK
debug1: SSH2_MSG_KEXINIT sent
debug3: Wrote 792 bytes for a total of 831
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-cbc at lysator.liu.se
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
debug2: kex_parse_kexinit: none,zlib at openssh.com,zlib
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc at lysator.liu.se,aes128-ctr,aes192-ctr,aes256-ctr
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,umac-64 at openssh.com,hmac-ripemd160,hmac-ripemd160 at openssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib at openssh.com
debug2: kex_parse_kexinit: none,zlib at openssh.com
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: 
debug2: kex_parse_kexinit: first_kex_follows 0 
debug2: kex_parse_kexinit: reserved 0 
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug3: Wrote 24 bytes for a total of 855
debug2: dh_gen_key: priv key bits set: 139/256
debug2: bits set: 537/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug3: Wrote 144 bytes for a total of 999
debug3: check_host_in_hostfile: filename /home/verdi.march/.ssh/known_hosts
debug3: check_host_in_hostfile: match line 1
debug1: Host '198.55.37.111' is known and matches the RSA host key.
debug1: Found key in /home/verdi.march/.ssh/known_hosts:1
debug2: bits set: 516/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug3: Wrote 16 bytes for a total of 1015
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug3: Wrote 48 bytes for a total of 1063
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/verdi.march/.ssh/identity ((nil))
debug2: key: /home/verdi.march/.ssh/id_rsa ((nil))
debug2: key: /home/verdi.march/.ssh/id_dsa ((nil))
debug3: Wrote 64 bytes for a total of 1127
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /home/verdi.march/.ssh/identity
debug3: no such identity: /home/verdi.march/.ssh/identity
debug1: Trying private key: /home/verdi.march/.ssh/id_rsa
debug3: no such identity: /home/verdi.march/.ssh/id_rsa
debug1: Trying private key: /home/verdi.march/.ssh/id_dsa
debug3: no such identity: /home/verdi.march/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred: ,password
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
root at 198.55.37.111's password: 
debug3: packet_send2: adding 48 (len 63 padlen 17 extra_pad 64)
debug2: we sent a password packet, wait for reply
debug3: Wrote 144 bytes for a total of 1271
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Requesting no-more-sessions at openssh.com
debug1: Entering interactive session.
debug3: Wrote 128 bytes for a total of 1399
debug2: callback start
debug2: client_session2_setup: id 0
debug2: channel 0: request pty-req confirm 1
debug1: Sending environment.
debug3: Ignored env SHELL
debug3: Ignored env TERM
debug3: Ignored env SSH_CLIENT
debug3: Ignored env SSH_TTY
debug1: Sending env LC_ALL = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env USER
debug3: Ignored env LS_COLORS
debug3: Ignored env PATH
debug3: Ignored env MAIL
debug3: Ignored env PWD
debug1: Sending env LANG = en_US.UTF-8
debug2: channel 0: request env confirm 0
debug3: Ignored env SHLVL
debug3: Ignored env HOME
debug3: Ignored env LANGUAGE
debug3: Ignored env LOGNAME
debug3: Ignored env SSH_CONNECTION
debug1: Sending env LC_CTYPE = C
debug2: channel 0: request env confirm 0
debug3: Ignored env LESSOPEN
debug3: Ignored env LESSCLOSE
debug3: Ignored env _
debug2: channel 0: request shell confirm 1
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug3: Wrote 576 bytes for a total of 1975
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 2097152
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Last login: Thu Dec 15 05:22:09 2011 from 203.30.38.226
Linux opencirrus-07308-c001 3.0.0-13-server #22~lucid1-Ubuntu SMP Thu Nov 3 14:46:55 UTC 2011 x86_64

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
opencirrus-07308-c001:~# debug1: client_input_channel_req: channel 0 rtype keepalive at openssh.com reply 1
debug3: Wrote 32 bytes for a total of 2007
debug1: client_input_channel_req: channel 0 rtype keepalive at openssh.com reply 1
debug3: Wrote 32 bytes for a total of 2039
debug1: client_input_channel_req: channel 0 rtype keepalive at openssh.com reply 1
debug3: Wrote 32 bytes for a total of 2071
debug3: Wrote -1 bytes for a total of 2071
Write failed: Broken pipe
===================== end ssh log ========================

Regards,
Verdi

-- 
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!		
Jetzt informieren: http://www.gmx.net/de/go/freephone

More information about the lxc-users mailing list