[Lxc-users] native (non-NAT) routing?

[Toens Bueker]

Ulli Horlacher <framstag at rus.uni-stuttgart.de> wrote:

> > host      zoo 129.69.1.39
> > container LXC 129.69.1.219
> > router        129.69.1.254
> > 
> > In LXC.conf is:
> > 
> > lxc.utsname = LXC
> > lxc.network.type = veth
> > lxc.network.link = br0
> > lxc.network.flags = up
> > lxc.network.name = eth0
> > lxc.network.mtu = 1500
> > lxc.network.ipv4 = 129.69.1.219/24
> 
> Same configuration on another host ("vms2", with another ip) works as
> expected!
> 
> zoo runs on virtual hardware (VMware ESXi), where vms2 runs on real
> hardware. I assume now, lxc bridge networking is not compatible with ESXi!

What is configured on ESXi?

Regards,
Töns
-- 
There is no safe distance.