[Lxc-users] PHYS type lxc not working

Sabdar sabdar at wellspringsys.com
Mon Jul 19 07:21:54 UTC 2010


Hi,
     i tried the same but by upgrading to the latest ip utility and its
works fine as you specified.With the old ip utility the "link add" commands
fails,Thanks for the help.

I tried "PHYS" in the kernel version 2.6.35-rc4 and phys seems to work but
with a problem ie) the working configuration is as follows,

lxc.utsname = gamma
lxc.network.type = phys
lxc.network.flags = up
*lxc.network.link = eth0*
*lxc.network.name* <http://lxc.network.name/>* = eth0*
lxc.network.ipv4 = 192.168.10.1

The same when we change as below  fails to release the host interface after
lxc is stopped

lxc.utsname = gamma
lxc.network.type = phys
lxc.network.flags = up
*lxc.network.link = eth1*
*lxc.network.name* <http://lxc.network.name/>* = eth0*
lxc.network.ipv4 = 192.168.10.1

Instead i see an interface as dev3 in my host after the lxc is stopped.Is it
necessary that both the network.link and network.name has to be same in the
case of "PHYS".

Thanks,
Sabdar.


On Thu, Jul 8, 2010 at 1:27 PM, atp <Andrew.Phillips at lmax.com> wrote:

> You need to add a macvlan device to the parent device with the same
> mode.
>
> So, if you have a macvlan with a link device of eth0, you'll need to
> create a macvlan device off eth0 - e.g. eth0:1 that is of mode bridge.
>
> There was an email yesterday that showed how to do that.
>
> Andy
>
> On Thu, 2010-07-08 at 10:13 +0530, Sabdar wrote:
> > ok thanks for the information,i will make a try on 2.6.35-rc4 kernel
> > and with latest lxc package.Also can anyone suggest how to make
> > macvlan container communicate with the host.i can make macvlan
> > communicate with other container using macvlan bridge mode similarly
> > is there any way that i can make it to allow communicate with host as
> > well.
> >
> >
> > Thanks,
> > Sabdar.
> >
> > On Thu, Jul 8, 2010 at 4:03 AM, Matt Helsley <matthltc at us.ibm.com>
> > wrote:
> >
> >         On Mon, Jul 05, 2010 at 10:09:21AM +0530, Sabdar wrote:
> >         >    Hi all,
> >         >         I want to use the below configuration in lxc, but
> >         the problem is the
> >         > physical interface is not getting release after i stop the
> >         container like it
> >         > happens in macvlan type.The interface gets disappear from
> >         host and i can
> >         > restore that only if i reboot my system,
> >         >
> >         > lxc.utsname = gamma
> >         > lxc.network.type = phys
> >         > lxc.network.flags = up
> >         > lxc.network.link = eth0
> >         > lxc.network.name = eth0
> >         > lxc.network.ipv4 = 192.168.10.1
> >         >
> >         > My kernel version :- linux-2.6.33
> >
> >
> >         Have you tried 2.6.35-rc4? It has Eric's sysfs and netns
> >         tagging
> >         patches which enhance support for using physical interfaces.
> >
> >         Cc'ing lxc-users (which is probably a better place to ask)
> >
> >         > Lxc version :- 0.6.5
> >
> >
> >         lxc 0.7.1 is also out.
> >
> >         I'm sorry, I know this isn't much help in figuring out the
> >         exact nature of the problem. Hopefully Cc'ing lxc-users will
> >         help.
> >
> >         Cheers,
> >                -Matt Helsley
> >
> >
> >
> ------------------------------------------------------------------------------
> > This SF.net email is sponsored by Sprint
> > What will you do first with EVO, the first 4G phone?
> > Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
> > _______________________________________________ Lxc-users mailing list
> Lxc-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/lxc-users
> Andrew Phillips
> Head of Systems
>
> www.lmax.com
>
> Office: +44 203 1922509
> Mobile: +44 (0)7595 242 900
>
> LMAX | Level 2, Yellow Building | 1 Nicholas Road | London | W11 4AN
>
>
>
>
> The information in this e-mail and any attachment is confidential and is
> intended only for the named recipient(s). The e-mail may not be disclosed or
> used by any person other than the addressee, nor may it be copied in any
> way. If you are not a named recipient please notify the sender immediately
> and delete any copies of this message. Any unauthorized copying, disclosure
> or distribution of the material in this e-mail is strictly forbidden. Any
> view or opinions presented are solely those of the author and do not
> necessarily represent those of the company.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.linuxcontainers.org/pipermail/lxc-users/attachments/20100719/e5823e2e/attachment.html>


More information about the lxc-users mailing list