[lxc-devel] [PATCH] init: Add upstart jobs and some more changes
Stéphane Graber
stgraber at ubuntu.com
Thu Jan 16 20:43:31 UTC 2014
This adds the 3 upstart jobs that we've had in Ubuntu for a while:
- lxc.conf: Main upstart job, triggers lxc-net.conf based on config
- lxc-instance.conf: Triggered by lxc.conf for each auto-started container
- lxc-net.conf: Triggered by lxc.conf, sets up lxcbr0, NAT, mangling, ...
In addition, there are two extra config files in /etc/default:
- lxc: Allows setting some values like http proxying, disabling autostart, ...
- lxc-net: Network configuration for the lxcbr0 bridge
This change also disables the sysv script for all distros but Oracle as
the current script won't work on either Ubuntu nor Debian and I suspect
quite a few more distros, so it's not nearly as distro-agnostic as we
thought.
For Debian, only install the upstart jobs and systemd unit.
For Ubuntu, only install the upstart jobs.
This change also moves all the init related stuff to config/init/
Signed-off-by: Stéphane Graber <stgraber at ubuntu.com>
---
config/Makefile.am | 2 +-
config/init/Makefile.am | 1 +
config/init/systemd/Makefile.am | 26 +++++++++++
config/init/systemd/lxc-devsetup | 25 ++++++++++
config/init/systemd/lxc.service | 17 +++++++
config/init/sysvinit/Makefile.am | 18 ++++++++
config/init/sysvinit/lxc | 64 ++++++++++++++++++++++++++
config/init/upstart/Makefile.am | 22 +++++++++
config/init/upstart/lxc-instance.conf | 22 +++++++++
config/init/upstart/lxc-net.conf | 86 +++++++++++++++++++++++++++++++++++
config/init/upstart/lxc.conf | 27 +++++++++++
configure.ac | 18 +++++---
lxc.spec.in | 2 +-
src/lxc/Makefile.am | 46 +------------------
src/lxc/lxc-devsetup | 25 ----------
src/lxc/lxc.service | 17 -------
src/lxc/lxc.sysvinit | 64 --------------------------
17 files changed, 322 insertions(+), 160 deletions(-)
create mode 100644 config/init/Makefile.am
create mode 100644 config/init/systemd/Makefile.am
create mode 100755 config/init/systemd/lxc-devsetup
create mode 100644 config/init/systemd/lxc.service
create mode 100644 config/init/sysvinit/Makefile.am
create mode 100755 config/init/sysvinit/lxc
create mode 100644 config/init/upstart/Makefile.am
create mode 100644 config/init/upstart/lxc-instance.conf
create mode 100644 config/init/upstart/lxc-net.conf
create mode 100644 config/init/upstart/lxc.conf
delete mode 100755 src/lxc/lxc-devsetup
delete mode 100644 src/lxc/lxc.service
delete mode 100755 src/lxc/lxc.sysvinit
diff --git a/config/Makefile.am b/config/Makefile.am
index 7ca23eb..02ba9ce 100644
--- a/config/Makefile.am
+++ b/config/Makefile.am
@@ -1 +1 @@
-SUBDIRS = etc templates
+SUBDIRS = etc init templates
diff --git a/config/init/Makefile.am b/config/init/Makefile.am
new file mode 100644
index 0000000..e2ffe28
--- /dev/null
+++ b/config/init/Makefile.am
@@ -0,0 +1 @@
+SUBDIRS = systemd sysvinit upstart
diff --git a/config/init/systemd/Makefile.am b/config/init/systemd/Makefile.am
new file mode 100644
index 0000000..82587b0
--- /dev/null
+++ b/config/init/systemd/Makefile.am
@@ -0,0 +1,26 @@
+EXTRA_DIST = \
+ lxc-devsetup \
+ lxc.service
+
+if INIT_SCRIPT_SYSTEMD
+if HAVE_DEBIAN
+SYSTEMD_UNIT_DIR = /lib/systemd/system
+else
+SYSTEMD_UNIT_DIR = /usr/lib/systemd/system
+endif
+install-systemd: lxc.service lxc-devsetup
+ $(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
+ $(INSTALL_DATA) lxc.service $(DESTDIR)$(SYSTEMD_UNIT_DIR)/
+
+uninstall-systemd:
+ rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/lxc.service
+ rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
+pkglibexec_SCRIPTS = lxc-devsetup
+else
+install-systemd:
+uninstall-systemd:
+endif
+
+install-data-local: install-systemd
+
+uninstall-local: uninstall-systemd
diff --git a/config/init/systemd/lxc-devsetup b/config/init/systemd/lxc-devsetup
new file mode 100755
index 0000000..3999ac8
--- /dev/null
+++ b/config/init/systemd/lxc-devsetup
@@ -0,0 +1,25 @@
+#!/bin/sh -
+
+# lxc.devsetup - Setup host /dev for container /dev subdirectories.
+
+if [[ ! -d /dev/.lxc ]]
+then
+ echo "Creating /dev/.lxc"
+ mkdir /dev/.lxc
+ chmod 755 /dev/.lxc
+fi
+
+if grep -q "/dev devtmpfs " /proc/self/mounts
+then
+ echo "/dev is devtmpfs"
+else
+ echo "/dev is not devtmpfs - mounting tmpfs on .lxc"
+ mount -t tmpfs tmpfs /dev/.lxc
+fi
+
+if [[ ! -d /dev/.lxc/user ]]
+then
+ echo "Creating /dev/.lxc/user"
+ mkdir /dev/.lxc/user
+ chmod 1777 /dev/.lxc/user
+fi
diff --git a/config/init/systemd/lxc.service b/config/init/systemd/lxc.service
new file mode 100644
index 0000000..aa20b91
--- /dev/null
+++ b/config/init/systemd/lxc.service
@@ -0,0 +1,17 @@
+[Unit]
+Description=LXC Container Initialization and Autoboot Code
+After=syslog.target
+
+[Service]
+Type=oneshot
+RemainAfterExit=yes
+ExecStartPre=/usr/libexec/lxc/lxc-devsetup
+ExecStart=/usr/libexec/lxc/lxc-startup start
+ExecStop=/usr/libexec/lxc/lxc-startup stop
+# Environment=BOOTUP=serial
+# Environment=CONSOLETYPE=serial
+StandardOutput=syslog
+StandardError=syslog
+
+[Install]
+WantedBy=multi-user.target
diff --git a/config/init/sysvinit/Makefile.am b/config/init/sysvinit/Makefile.am
new file mode 100644
index 0000000..4372c2d
--- /dev/null
+++ b/config/init/sysvinit/Makefile.am
@@ -0,0 +1,18 @@
+EXTRA_DIST = lxc
+
+if INIT_SCRIPT_SYSV
+install-sysvinit: lxc
+ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
+ $(INSTALL_SCRIPT) lxc $(DESTDIR)$(sysconfdir)/rc.d/init.d/lxc
+
+uninstall-sysvinit:
+ rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/lxc
+ rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
+else
+install-sysvinit:
+uninstall-sysvinit:
+endif
+
+install-data-local: install-sysvinit
+
+uninstall-local: uninstall-sysvinit
diff --git a/config/init/sysvinit/lxc b/config/init/sysvinit/lxc
new file mode 100755
index 0000000..9128187
--- /dev/null
+++ b/config/init/sysvinit/lxc
@@ -0,0 +1,64 @@
+#!/bin/sh
+#
+# lxc Start/Stop LXC autoboot containers
+#
+# chkconfig: 345 99 01
+# description: Starts/Stops all LXC containers configured for autostart.
+#
+### BEGIN INIT INFO
+# Provides: lxc
+# Default-Start: 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Bring up/down LXC autostart containers
+# Description: Bring up/down LXC autostart containers
+### END INIT INFO
+
+# Source function library.
+. /etc/init.d/functions
+
+# Check for needed utility program
+[ -x /usr/bin/lxc-autostart ] || exit 1
+
+# If libvirtd is providing the bridge, it might not be
+# immediately available, so wait a bit for it before starting
+# up the containers or else any that use the bridge will fail
+# to start
+wait_for_bridge()
+{
+ [ -f /etc/lxc/default.conf ] || { return 0; }
+
+ BRNAME=`grep lxc.network.link /etc/lxc/default.conf |awk '{print $3}'`
+ [ -n $BRNAME ] || { return 0; }
+
+ for try in `seq 1 30`; do
+ ifconfig -a |grep "^$BRNAME" >/dev/null 2>&1
+ if [ $? = 0 ]; then
+ return
+ fi
+ sleep 1
+ done
+}
+
+# See how we were called.
+case "$1" in
+ start)
+ [ ! -f /var/lock/subsys/lxc ] || { exit 0; }
+
+ # Start containers
+ wait_for_bridge
+ action $"Starting LXC containers: " /usr/bin/lxc-autostart
+ touch /var/lock/subsys/lxc
+ ;;
+ stop)
+ action $"Stopping LXC containers: " /usr/bin/lxc-autostart -s
+ rm -f /var/lock/subsys/lxc
+ ;;
+ restart|reload|force-reload)
+ $0 stop
+ $0 start
+ ;;
+ *)
+ echo $"Usage: $0 {start|stop|restart|reload|force-reload}"
+ exit 2
+esac
+exit $?
diff --git a/config/init/upstart/Makefile.am b/config/init/upstart/Makefile.am
new file mode 100644
index 0000000..8205f20
--- /dev/null
+++ b/config/init/upstart/Makefile.am
@@ -0,0 +1,22 @@
+EXTRA_DIST = lxc.conf lxc-instance.conf lxc-net.conf
+
+if INIT_SCRIPT_UPSTART
+install-upstart: lxc.conf lxc-instance.conf lxc-net.conf
+ $(MKDIR_P) $(DESTDIR)$(sysconfdir)/init/
+ $(INSTALL_DATA) lxc.conf $(DESTDIR)$(sysconfdir)/init/
+ $(INSTALL_DATA) lxc-instance.conf $(DESTDIR)$(sysconfdir)/init/
+ $(INSTALL_DATA) lxc-net.conf $(DESTDIR)$(sysconfdir)/init/
+
+uninstall-syvinit:
+ rm -f $(DESTDIR)$(sysconfdir)/rc.d/init/lxc.conf
+ rm -f $(DESTDIR)$(sysconfdir)/rc.d/init/lxc-instance.conf
+ rm -f $(DESTDIR)$(sysconfdir)/rc.d/init/lxc-net.conf
+ rmdir $(DESTDIR)$(sysconfdir)/rc.d/init || :
+else
+install-syvinit:
+uninstall-upstart:
+endif
+
+install-data-local: install-upstart
+
+uninstall-local: uninstall-upstart
diff --git a/config/init/upstart/lxc-instance.conf b/config/init/upstart/lxc-instance.conf
new file mode 100644
index 0000000..58d045d
--- /dev/null
+++ b/config/init/upstart/lxc-instance.conf
@@ -0,0 +1,22 @@
+description "lxc instance"
+author "Christian Kampka <chris at emerge-life.de>"
+
+stop on stopping lxc
+
+# wait for 120 seconds for container to shutdown before killing it
+kill timeout 120
+
+# send SIGPWR to container to trigger a shutdown (see lxc-shutdown(1))
+kill signal SIGPWR
+
+
+instance $NAME
+usage "NAME=name of LXC instance"
+
+pre-start script
+ lxc-wait -s RUNNING -n $NAME -t 0 && { stop; exit 0; } || true
+end script
+
+script
+ exec lxc-start -n $NAME
+end script
diff --git a/config/init/upstart/lxc-net.conf b/config/init/upstart/lxc-net.conf
new file mode 100644
index 0000000..517bd2b
--- /dev/null
+++ b/config/init/upstart/lxc-net.conf
@@ -0,0 +1,86 @@
+description "lxc network"
+author "Serge Hallyn <serge.hallyn at canonical.com>"
+
+start on starting lxc
+stop on stopped lxc
+
+env USE_LXC_BRIDGE="false"
+env LXC_BRIDGE="lxcbr0"
+env LXC_ADDR="10.0.3.1"
+env LXC_NETMASK="255.255.255.0"
+env LXC_NETWORK="10.0.3.0/24"
+env LXC_DHCP_RANGE="10.0.3.2,10.0.3.254"
+env LXC_DHCP_MAX="253"
+env LXC_DHCP_CONFILE=""
+env varrun="/var/run/lxc"
+env LXC_DOMAIN=""
+
+pre-start script
+ [ -f /etc/default/lxc ] && . /etc/default/lxc
+
+ [ "x$USE_LXC_BRIDGE" = "xtrue" ] || { stop; exit 0; }
+
+ use_iptables_lock="-w"
+ iptables -w -L -n 2>&1 > /dev/null || use_iptables_lock=""
+ cleanup() {
+ # dnsmasq failed to start, clean up the bridge
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -t nat -D POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE || true
+ iptables $use_iptables_lock -t mangle -D POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
+ ifconfig ${LXC_BRIDGE} down || true
+ brctl delbr ${LXC_BRIDGE} || true
+ }
+
+ if [ -d /sys/class/net/${LXC_BRIDGE} ]; then
+ if [ ! -f ${varrun}/network_up ]; then
+ # bridge exists, but we didn't start it
+ stop;
+ fi
+ exit 0;
+ fi
+
+ # set up the lxc network
+ brctl addbr ${LXC_BRIDGE} || { echo "Missing bridge support in kernel"; stop; exit 0; }
+ echo 1 > /proc/sys/net/ipv4/ip_forward
+ mkdir -p ${varrun}
+ ifconfig ${LXC_BRIDGE} ${LXC_ADDR} netmask ${LXC_NETMASK} up
+ iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -I INPUT -i ${LXC_BRIDGE} -p tcp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -t nat -A POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE
+ iptables $use_iptables_lock -t mangle -A POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
+
+ LXC_DOMAIN_ARG=""
+ if [ -n "$LXC_DOMAIN" ]; then
+ LXC_DOMAIN_ARG="-s $LXC_DOMAIN"
+ fi
+ dnsmasq $LXC_DOMAIN_ARG -u lxc-dnsmasq --strict-order --bind-interfaces --pid-file=${varrun}/dnsmasq.pid --conf-file=${LXC_DHCP_CONFILE} --listen-address ${LXC_ADDR} --dhcp-range ${LXC_DHCP_RANGE} --dhcp-lease-max=${LXC_DHCP_MAX} --dhcp-no-override --except-interface=lo --interface=${LXC_BRIDGE} --dhcp-leasefile=/var/lib/misc/dnsmasq.${LXC_BRIDGE}.leases --dhcp-authoritative || cleanup
+ touch ${varrun}/network_up
+end script
+
+post-stop script
+ [ -f /etc/default/lxc ] && . /etc/default/lxc
+ [ -f "${varrun}/network_up" ] || exit 0;
+ # if $LXC_BRIDGE has attached interfaces, don't shut it down
+ ls /sys/class/net/${LXC_BRIDGE}/brif/* > /dev/null 2>&1 && exit 0;
+
+ if [ -d /sys/class/net/${LXC_BRIDGE} ]; then
+ use_iptables_lock="-w"
+ iptables -w -L -n 2>&1 > /dev/null || use_iptables_lock=""
+ ifconfig ${LXC_BRIDGE} down
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 67 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p udp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -D INPUT -i ${LXC_BRIDGE} -p tcp --dport 53 -j ACCEPT
+ iptables $use_iptables_lock -t nat -D POSTROUTING -s ${LXC_NETWORK} ! -d ${LXC_NETWORK} -j MASQUERADE || true
+ iptables $use_iptables_lock -t mangle -D POSTROUTING -o ${LXC_BRIDGE} -p udp -m udp --dport 68 -j CHECKSUM --checksum-fill
+ pid=`cat ${varrun}/dnsmasq.pid 2>/dev/null` && kill -9 $pid || true
+ rm -f ${varrun}/dnsmasq.pid
+ brctl delbr ${LXC_BRIDGE}
+ fi
+ rm -f ${varrun}/network_up
+end script
diff --git a/config/init/upstart/lxc.conf b/config/init/upstart/lxc.conf
new file mode 100644
index 0000000..1a5c5c9
--- /dev/null
+++ b/config/init/upstart/lxc.conf
@@ -0,0 +1,27 @@
+description "lxc"
+author "Serge Hallyn <serge.hallyn at canonical.com>"
+
+start on runlevel [2345]
+stop on starting rc RUNLEVEL=[016]
+
+env LXC_AUTO="false"
+
+pre-start script
+ [ -f /etc/default/lxc ] && . /etc/default/lxc
+
+ # don't load profiles if mount mediation is not supported
+ SYSF=/sys/kernel/security/apparmor/features/mount/mask
+ if [ -f $SYSF ]; then
+ if [ -x /lib/init/apparmor-profile-load ]; then
+ /lib/init/apparmor-profile-load usr.bin.lxc-start
+ /lib/init/apparmor-profile-load lxc-containers
+ fi
+ fi
+
+ [ "x$LXC_AUTO" = "xtrue" ] || exit 0
+
+ lxc-autostart -L | while read line; do
+ set -- $line
+ (start lxc-instance NAME=$1 && sleep $2) || true
+ done
+end script
diff --git a/configure.ac b/configure.ac
index d8be165..6b93299 100644
--- a/configure.ac
+++ b/configure.ac
@@ -78,7 +78,7 @@ AM_CONDITIONAL([DISTRO_UBUNTU], [test "x$with_distro" = "xubuntu"])
AC_MSG_CHECKING([for init system type])
AC_ARG_WITH([init-script],
[AC_HELP_STRING([--with-init-script@<:@=TYPE@<:@,TYPE,...@:>@@:>@],
- [Type(s) of init script to install: sysv, systemd, upstart,
+ [Type(s) of init script to install: sysvinit, systemd, upstart,
distro @<:@default=distro@:>@])],[],[with_init_script=distro])
case "$with_init_script" in
distro)
@@ -87,17 +87,17 @@ case "$with_init_script" in
init_script=systemd
;;
redhat|centos|oracle|oracleserver)
- init_script=sysv
+ init_script=sysvinit
;;
debian)
- init_script=sysv,upstart,systemd
+ init_script=upstart,systemd
;;
ubuntu)
init_script=upstart
;;
*)
- echo -n "Linux distribution init system unknown, defaulting to sysv"
- init_script=sysv
+ echo -n "Linux distribution init system unknown."
+ init_script=
;;
esac
;;
@@ -110,7 +110,7 @@ esac
(IFS="," ; for init_sys in $init_script;
do
case "$init_sys" in
- none|sysv|systemd|upstart)
+ none|sysvinit|systemd|upstart)
;;
*)
exit 1
@@ -118,7 +118,7 @@ do
esac
done) || AC_MSG_ERROR([Unknown init system type in $init_script])
-AM_CONDITIONAL([INIT_SCRIPT_SYSV], [echo "$init_script" |grep -q "sysv"])
+AM_CONDITIONAL([INIT_SCRIPT_SYSV], [echo "$init_script" |grep -q "sysvinit"])
AM_CONDITIONAL([INIT_SCRIPT_SYSTEMD], [echo "$init_script" |grep -q "systemd"])
AM_CONDITIONAL([INIT_SCRIPT_UPSTART], [echo "$init_script" |grep -q "upstart"])
AC_MSG_RESULT($init_script)
@@ -547,6 +547,10 @@ AC_CONFIG_FILES([
lxc.spec
config/Makefile
+ config/init/Makefile
+ config/init/sysvinit/Makefile
+ config/init/systemd/Makefile
+ config/init/upstart/Makefile
config/etc/Makefile
config/templates/Makefile
config/templates/debian.common.conf
diff --git a/lxc.spec.in b/lxc.spec.in
index 615fcd6..c8ff08e 100644
--- a/lxc.spec.in
+++ b/lxc.spec.in
@@ -31,7 +31,7 @@
BuildRequires: systemd-units
%else
%global with_systemd 0
-%define init_script sysv
+%define init_script sysvinit
%endif
# RPM needs alpha/beta/rc in Release: not Version: to ensure smooth
diff --git a/src/lxc/Makefile.am b/src/lxc/Makefile.am
index 34d69a6..1a63fca 100644
--- a/src/lxc/Makefile.am
+++ b/src/lxc/Makefile.am
@@ -165,11 +165,8 @@ bin_SCRIPTS = \
EXTRA_DIST = \
lxc-device \
- lxc-devsetup \
lxc-ls \
- lxc-top \
- lxc.service \
- lxc.sysvinit
+ lxc-top
if ENABLE_PYTHON
bin_SCRIPTS += lxc-device
@@ -212,43 +209,6 @@ bin_PROGRAMS = \
pkglibexec_PROGRAMS = \
lxc-init
-if INIT_SCRIPT_SYSV
-install-init: lxc.sysvinit
- $(MKDIR_P) $(DESTDIR)$(sysconfdir)/rc.d/init.d
- $(INSTALL_SCRIPT) lxc.sysvinit $(DESTDIR)$(sysconfdir)/rc.d/init.d/lxc
-
-uninstall-init:
- rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/lxc
- rmdir $(DESTDIR)$(sysconfdir)/rc.d/init.d || :
-else
-install-init:
-uninstall-init:
-endif
-
-if INIT_SCRIPT_SYSTEMD
-SYSTEMD_UNIT_DIR = /usr/lib/systemd/system
-install-systemd: lxc.service lxc-devsetup
- $(MKDIR_P) $(DESTDIR)$(SYSTEMD_UNIT_DIR)
- $(INSTALL_DATA) lxc.service $(DESTDIR)$(SYSTEMD_UNIT_DIR)/
-
-uninstall-systemd:
- rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/lxc.service
- rmdir $(DESTDIR)$(SYSTEMD_UNIT_DIR) || :
-pkglibexec_SCRIPTS = lxc-devsetup
-else
-install-systemd:
-uninstall-systemd:
-endif
-
-if INIT_SCRIPT_UPSTART
-# FIXME: install/uninstall upstart script here
-install-upstart:
-uninstall-upstart:
-else
-install-upstart:
-uninstall-upstart:
-endif
-
AM_LDFLAGS = -Wl,-E
if ENABLE_RPATH
AM_LDFLAGS += -Wl,-rpath -Wl,$(libdir)
@@ -286,10 +246,6 @@ lxc_snapshot_SOURCES = lxc_snapshot.c
lxc_usernsexec_SOURCES = lxc_usernsexec.c
lxc_user_nic_SOURCES = lxc_user_nic.c network.c network.h
-install-data-local: install-init install-systemd install-upstart
-
-uninstall-local: uninstall-init uninstall-systemd uninstall-upstart
-
install-exec-local: install-soPROGRAMS
mkdir -p $(DESTDIR)$(datadir)/lxc
install -c -m 644 lxc.functions $(DESTDIR)$(datadir)/lxc
diff --git a/src/lxc/lxc-devsetup b/src/lxc/lxc-devsetup
deleted file mode 100755
index 3999ac8..0000000
--- a/src/lxc/lxc-devsetup
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh -
-
-# lxc.devsetup - Setup host /dev for container /dev subdirectories.
-
-if [[ ! -d /dev/.lxc ]]
-then
- echo "Creating /dev/.lxc"
- mkdir /dev/.lxc
- chmod 755 /dev/.lxc
-fi
-
-if grep -q "/dev devtmpfs " /proc/self/mounts
-then
- echo "/dev is devtmpfs"
-else
- echo "/dev is not devtmpfs - mounting tmpfs on .lxc"
- mount -t tmpfs tmpfs /dev/.lxc
-fi
-
-if [[ ! -d /dev/.lxc/user ]]
-then
- echo "Creating /dev/.lxc/user"
- mkdir /dev/.lxc/user
- chmod 1777 /dev/.lxc/user
-fi
diff --git a/src/lxc/lxc.service b/src/lxc/lxc.service
deleted file mode 100644
index aa20b91..0000000
--- a/src/lxc/lxc.service
+++ /dev/null
@@ -1,17 +0,0 @@
-[Unit]
-Description=LXC Container Initialization and Autoboot Code
-After=syslog.target
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStartPre=/usr/libexec/lxc/lxc-devsetup
-ExecStart=/usr/libexec/lxc/lxc-startup start
-ExecStop=/usr/libexec/lxc/lxc-startup stop
-# Environment=BOOTUP=serial
-# Environment=CONSOLETYPE=serial
-StandardOutput=syslog
-StandardError=syslog
-
-[Install]
-WantedBy=multi-user.target
diff --git a/src/lxc/lxc.sysvinit b/src/lxc/lxc.sysvinit
deleted file mode 100755
index 9128187..0000000
--- a/src/lxc/lxc.sysvinit
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-#
-# lxc Start/Stop LXC autoboot containers
-#
-# chkconfig: 345 99 01
-# description: Starts/Stops all LXC containers configured for autostart.
-#
-### BEGIN INIT INFO
-# Provides: lxc
-# Default-Start: 3 4 5
-# Default-Stop: 0 1 6
-# Short-Description: Bring up/down LXC autostart containers
-# Description: Bring up/down LXC autostart containers
-### END INIT INFO
-
-# Source function library.
-. /etc/init.d/functions
-
-# Check for needed utility program
-[ -x /usr/bin/lxc-autostart ] || exit 1
-
-# If libvirtd is providing the bridge, it might not be
-# immediately available, so wait a bit for it before starting
-# up the containers or else any that use the bridge will fail
-# to start
-wait_for_bridge()
-{
- [ -f /etc/lxc/default.conf ] || { return 0; }
-
- BRNAME=`grep lxc.network.link /etc/lxc/default.conf |awk '{print $3}'`
- [ -n $BRNAME ] || { return 0; }
-
- for try in `seq 1 30`; do
- ifconfig -a |grep "^$BRNAME" >/dev/null 2>&1
- if [ $? = 0 ]; then
- return
- fi
- sleep 1
- done
-}
-
-# See how we were called.
-case "$1" in
- start)
- [ ! -f /var/lock/subsys/lxc ] || { exit 0; }
-
- # Start containers
- wait_for_bridge
- action $"Starting LXC containers: " /usr/bin/lxc-autostart
- touch /var/lock/subsys/lxc
- ;;
- stop)
- action $"Stopping LXC containers: " /usr/bin/lxc-autostart -s
- rm -f /var/lock/subsys/lxc
- ;;
- restart|reload|force-reload)
- $0 stop
- $0 start
- ;;
- *)
- echo $"Usage: $0 {start|stop|restart|reload|force-reload}"
- exit 2
-esac
-exit $?
--
1.8.5.2
More information about the lxc-devel
mailing list